Hand-held homogenizers can be used in pharmaceuticals, biochemicals, food, nanomaterials, coatings, adhesives, daily chemicals, printing and dyeing, petrochemicals, paper chemistry, polyurethane, inorganic salts, asphalt, silicone, pesticides, water treatment, Heavy oil emulsification, diesel emulsification, electronics, battery and other industries.
The parts of the working head of the hand-held homogenizer in contact with materials are all made of high-quality stainless steel, which has good corrosion resistance; the working head is connected with the drive motor by a coupling, which is more convenient and flexible to disassemble; one-handed, it is the best choice for micro-processing in the laboratory. Professional equipment.

So, how to clean the hand-held homogenizer after use?
1. After the working head is used, it needs to be cleaned in time to avoid residual materials sticking to the gap between the rotor and the stator, avoiding the reproduction of bacteria and affecting subsequent use.
2. Cleaning method
① For materials that are easy to clean, you can add an appropriate amount of soluble cleaning agent to the container, let the working head run at a medium speed for two minutes, then wash it with clean water and dry it with a soft cloth.
② For materials that are difficult to clean, it is recommended to use solvents for cleaning, but it is not suitable to soak in strong corrosive solvents for a long time.
③ If the application field of the hand-held homogenizer is biochemical, pharmaceutical, food and other industries that require asepsis, chemical treatment, steam disinfection and other methods can be used for cleaning and disinfection.
④ After each use of the hand-held homogenizer, the working head needs to be cleaned, put into a special working head sleeve, and stored in a dry place.
⑤ When we clean the motor, we should pay attention to avoid using solvents. Because most plastics are easily affected by different types of industrial solvents, if these solvents are used, it is easy to damage the plastic. We can wipe off the stains, dust, etc. with a clean cloth.
