1. The constant temperature and humidity Test Chamber is widely used
The constant temperature and humidity Test Chamber belongs to the same series as the "high-low temperature alternating damp heat Test Chamber". The constant temperature and humidity Test Chamber can provide a high temperature and high humidity environment, and compare the material changes and strength attenuation before and after the rubber and plastic test. The constant temperature and humidity Test Chamber can also simulate the container environment, detect the fading and shrinkage of rubber and plastic under high temperature and high humidity, and specifically test the heat resistance, cold resistance and humidity resistance of various materials.
With its outstanding advantages, the constant temperature and Humidity Chamber has been widely used in life, and is suitable for electronics, electrical appliances, food, battery new energy, vehicles, metals, chemicals, building materials and other fields.
2. The operation process of the constant temperature and Humidity Chamber
There are many things you need to know about programmable constant temperature and Humidity Chambers. The following is an introduction to the operation process of the programmable constant temperature and humidity Test Chamber.
1. First, connect the three-phase five-wire power cord to the air switch, and pay attention to the safety of electricity when connecting. After connecting the power supply, turn on the leakage protection switch. Leakage protection switch is a means to protect the constant temperature and humidity Test Chamber, also known as leakage protector. It is a new type of electrical safety device that can prevent single-phase electric shock accidents, electrical fire accidents caused by leakage, and electric shock accidents caused by leakage of electrical equipment and electrical lines.
2. Observe whether the indicator light of the phase sequence protector is normal. If the red light of the phase sequence protector is not on, replace any two of the three live wires.
3. Open the door of the constant temperature and humidity Test Chamber and put it into the sample rack. The placement of the sample should be 1/3 of the volume of the box, try not to exceed 2/3, so as not to block the air circulation and affect the temperature uniformity.
4. The control panel is equipped with an over-temperature protector, which can monitor the temperature in the box in real time. If the temperature cannot be controlled, it will automatically enter the standby state for protection.
5. Turn on the control instrument, enter the setting interface, and enter the temperature, humidity and running time (it is recommended to add water to 3/4 of the Water Tank).
6. After returning, run it.
7. You can click the graph to query the real-time and historical curves of temperature and humidity.
