1. In order to avoid machine failure in the programmable constant temperature and humidity Test Chamber, please provide a power supply within the rated voltage range.
2. In order to prevent electric shock or failure and failure of the constant temperature and humidity Test Chamber, please do not turn on the power until the installation and wiring are completed.
3. The constant temperature and Humidity Chamber is a non-explosion-proof product, please do not use the constant temperature and humidity machine in an environment with flammable and explosive gases.
4. Try not to open the door of the constant temperature and humidity Test Chamber when the instrument is working. Opening at a high temperature may cause burns to the operator, and opening at a low temperature may cause frostbite to the staff, and may cause the evaporator to freeze, affecting the cooling effect. If it needs to be opened, please do some protection work.
5. It is forbidden to disassemble, process, modify or repair the constant temperature and humidity Test Chamber without authorization, otherwise there will be danger of abnormal movement, electric shock or fire.
6. The ventilation holes of the constant temperature and humidity Test Chamber body should be kept unobstructed to avoid failure, abnormal movement, shortened life and fire.
7. When unpacking the constant temperature and humidity Chamber, if the machine is damaged or deformed, please do not use it.
8. When installing and setting up the constant temperature and humidity Test Chamber machine, be careful not to let dust, threaded ends, iron filings and other items enter, otherwise erroneous actions or failures will occur.
9. The wiring of the constant temperature and Humidity Chamber needs to be correct and grounded. Failure to ground may result in electric shock, misoperation accidents, abnormal display, or large measurement errors.
10. Regularly check the terminal screws and fixing brackets of the constant temperature and humidity Test Chamber, and do not use them when they are loose.
11. During the operation of the instrument in the constant temperature and humidity Test Chamber, the power terminal cover needs to be installed on the terminal board to prevent electric shock.
12. When the instruments in the constant temperature and humidity Test Chamber are running, safety should be fully considered before modifying settings, signal output, starting, stopping and other operations. Misoperation will cause damage or malfunction to the working equipment.
13. Please wipe the instruments of the constant temperature and humidity Test Chamber with a dry cloth. Do not use alcohol, gasoline or other organic solvents, and do not splash water on the meter. If the meter is immersed in water, please stop using it immediately, otherwise there is a risk of electric leakage, electric shock or fire.
14. The internal parts of the constant temperature and humidity Test Chamber have a certain service life. In order to continue to use the instrument safely, please perform regular maintenance and maintenance. When disposing of this product, please treat it as industrial waste.
