Customers are more concerned about the parts of the consumables in the constant temperature and Humidity Chamber. When purchasing a constant temperature and humidity Test Chamber, users should consider future equipment, maintenance costs, and consumable parts costs. Therefore, many customers will ask which spare parts of the constant temperature and Humidity Chamber are easily damaged. While temperature and humidity controlled chamber supplies are limited, they do exist, including damp cloths, heat pipes, humidification pipes, and other items.
Some relatively fragile spare parts in the constant temperature and humidity Test Chamber are motors, heating pipes, humidification pipes, etc.; that is to say, if the refrigeration unit in the cooler is not cleaned and maintained properly, the refrigeration compressor will jump high or leak refrigerant. are common failures.
1. Is it cost-effective to replace or repair these parts of the constant temperature and Humidity Chamber?
In our view, such charges are reasonable. The cost of replacing these parts is only 1% of the total cost of the equipment. Technically professional manufacturers make equipment, such small problems are very common, and all key electronic equipment selected for constant temperature and Humidity Chamber equipment are imported and familiar with brands, and professional technicians with more than ten years of work experience assemble and debug, relatively The maintenance rate will be lower, so users don't need to worry too much about the product quality of the equipment. Manufacturers provide free warranty and one-year maintenance, even if the product is not particularly good.
Also, while these are wearing parts, they don't fail very often. If the constant temperature and Humidity Chamber is used frequently, the heating tube and humidifying tube will need to be replaced in about two years, and the motor in about three years, and the replacement method is relatively simple. It can be used for about two or three years with one replacement, and the replacement method is relatively simple. It is also possible to guide customers by telephone to replace them by themselves.
2. There is no need to repeat the importance of the technical performance of the sheet metal section of the constant temperature and Humidity Chamber
Due to many failures of the constant temperature and humidity environment test equipment, the customer's long-term use deformation will increase, which will have a great impact on the experimental results and the actual operation of the safety of employees.
The environment is the second factor that customers consider. Since the quality of parts determines the degree and performance of equipment damage, poor quality parts will cause equipment damage too quickly, resulting in various common faults and equipment life. Constant temperature and Humidity Chamber manufacturers often use spare parts when the quality of production line equipment occurs . The degree of damage and equipment performance determine the quality of the parts used in the production line.
