The basic use of laboratory ovens is for glassware drying and sterilization equipment. Laboratory ovens can also be used to heat, dehydrate or soften samples, as well as many other laboratory applications across a variety of industries. Laboratory ovens are cost-effective equipment used in industries including civil engineering, technical industries, and healthcare. It uses convection to transfer heat into the furnace, keeping them at an even temperature.
Features:
1. The body of the laboratory Industrial Oven adopts argon arc welding or the inner and outer tanks are made of galvanized sheet and stainless steel. The appearance is beautiful and novel.
2. Intelligent microcomputer control, with PID self-tuning function, the temperature control accuracy can reach your good temperature control accuracy, double-row digital display. After the Drying Oven is heated to the temperature, set the timer to 0-999 minutes, and the heating power will be turned off when the time is reached.
3. Use hot air internal circulation to ensure temperature uniformity
4. A heat-resistant silicone rubber ring is installed at the connection between the working room and the door to ensure the sealing between the working room and the door.
5. The box door adopts double-layer toughened glass door, which can clearly observe the heated items in the box.
6. Temperature limit alarm system, when the temperature exceeds the limit, it will be automatically interrupted to ensure the safe operation of the experiment without accidents.
Precautions for use:
1. Environmental test equipment should be placed in a dry and horizontal place indoors to prevent vibration and corrosion.
2. Pay attention to the safety of electricity use, and install a power switch with sufficient capacity according to the power consumption of the oven. Choose an adequate power cord and have a good ground wire.
3. When placing samples, be careful not to arrange them too densely. The test product should not be placed on a radiator so as not to interfere with the upward flow of hot air. It is forbidden to bake flammable, explosive, volatile and corrosive items.
4. When you need to observe the sample in the studio, you can open the outer door and observe through the glass door. But open the door as little as possible so as not to affect the thermostat.
5. In the blast furnace, the blower needs to be turned on during the heating and constant temperature process, otherwise it will affect the uniformity of the temperature in the working room and damage the heating element.
6. After the work of the chamber equipment is completed, the power supply should be cut off in time to ensure safety.
7. Keep the inside and outside of the oven clean.
8. When in use, keep the temperature not exceeding the maximum operating temperature of the oven.
