1. Installation site requirements of thermal shock Test Chamber
The thermal shock Test Chamber is a kind of precision equipment and a fixed asset of the user, so it should be thoroughly understood before purchasing. In the early stages of understanding, the price of the equipment and whether the utilization rate is high will be considered for evaluation. Then, when purchasing, you will also consider whether the equipment has requirements for the venue? Is there any effect when placed with other equipment?
The thermal shock Test Chamber has the following requirements for the site:
1. The ambient temperature should not be too high or too low, the temperature should be 25°C±5°C, and the humidity should be ≤85%RH.
2. It cannot be placed on the roof or outdoors. It needs to be placed indoors to avoid sunlight to prevent the equipment from aging.
3. The thermal shock Test Chamber will dissipate heat during operation, so a space of 50~80cm should be reserved around the equipment to facilitate follow-up engineers to visit for maintenance.
4. It cannot be placed together with the vibration table, nor can it be placed with corrosion equipment such as salt spray Test Chambers.
5. The thermal shock chamber should be installed on a flat ground without bumps.
2. What details should be paid attention to when purchasing a thermal shock Test Chamber?
For users, in addition to high cost performance, quality is also very important, so buy a good thermal shock Test Chamber. After all, the price of a good thermal shock Test Chamber is not cheap, and it is also a fortune for users. Small expenses can be counted as fixed assets, so when looking at factory comparisons, you need to pay attention to the following details:
1. Check whether the parts are imported, such as compressors, controllers, evaporators, condensers and other main parts, especially counterfeit parts;
2. To see whether it is a manufacturer or an agent, it can be judged from the production workshop, parts warehouse, business license, etc.;
3. Look at the manufacturer's qualifications, year of establishment and related certificates, such as patent certificates, CE export certificates, etc.;
4. It is very important to check the on-site production process, especially the welding part and test method of the refrigeration system.
