Energy saving and environmental protection should become a good habit in our daily life, which can not only make our daily life greener, but also save product costs. We know that the constant temperature and Humidity Chamber consumes a lot of power when it works under high temperature and high humidity conditions. We will show you how to save energy when using a constant temperature and Humidity Chamber?
1. The constant temperature and Humidity Chamber should be kept in a cool place, placed on the upper and lower sides of the constant temperature and Humidity Chamber, and a moderate indoor space (65~70cm) should be left on the back, which is conducive to the heat dissipation of the heat pipe. Due to the high working temperature around the constant temperature and Humidity Chamber, the power consumption of the constant temperature and Humidity Chamber will increase.
2. When the constant temperature and Humidity Chamber is powered on and used normally, please try not to turn off the power unless there are special circumstances. Frequent power outages not only fail to save electricity, but also affect the service life of the compressor.
In addition, place the constant temperature and Humidity Chamber in a cool and ventilated place, and keep a certain distance from the wall to ensure heat dissipation and ventilation.
3. After using the constant temperature and Humidity Chamber for a period of time, some frost will occur. If it cannot be thawed on time, it will affect the actual effect of the refrigerator.
4. The opening time of the constant temperature and Humidity Chamber needs to be short. If there is a power failure, please do not rush to open the door of the constant temperature and Humidity Chamber. When we usually pick and place samples, we need to minimize the number and time of opening the door. According to the data detected by the environmental chamber supplier, every minute the door is opened will cause the compressor to work for 5 minutes to restore the temperature in the constant temperature and Humidity Chamber, and the power consumption is 0.008 degrees.
5. Frequently check the sealing strip of the constant temperature and Humidity Chamber. Pay attention to the cleaning and maintenance of the constant temperature and Humidity Chamber. When cleaning, disconnect the switch power supply and wipe it with a wet towel.
6. Every time the door of the constant temperature and Humidity Chamber is opened, the air conditioner will be exposed, and the heat flow will invade, so the refrigeration compressor needs to run again. Customers should try to avoid the frequency and time of opening and closing the door to save the cost of the temperature room.
