1. Cleaning and maintenance of water recycling
1. The supply Water Tank and the water recovery Water Tank must be cleaned and maintained regularly (once every six months).
2. The water level control float group can be cleaned after removing the connecting screws (once every six months)
3. After removing the six screws around the humidifying cylinder, remove the scale (once every six months).
* Note: Before disassembling, drain the water in the furnace and turn off the main power switch
4. Maintenance of water quality filter. This part is a consumable material and must be replaced regularly (about once a year) depending on the quality of the water. Conversely, if the water quality is poor or the number of times the water returns to the water cycle is high, the frequency of replacement will be higher.
*Note: Always ensure that the quality of the humidification water is pure, and keep replacement parts in stock.
2. Replacement of special gauze for wet bulb
If it is found that the gauze has turned yellow and dirty, and its water absorption capacity is poor, replace it immediately.
3. Cleaning and maintenance of the radiator of the refrigerator
Powerful AIR can be used to remove dust and increase cooling (every six months).
4. The test area inside the machine should be kept clean at all times
