In the past, manual coating was mostly used in general coating experiments, and the coating was uneven and the overall effect was poor. In order to solve these problems, the laboratory coater was conceived and born. The function of the laboratory coater is to facilitate the accurate coating on different substrates by the experimenters, reduce and eliminate the errors caused by human factors such as different coating speeds and pressures. It is mainly used for production experiments of metal foil, glue, paper, and film, and can also be used for other related coating and coating industries.
The reason why the film coating machine needs to replace the wire rod regularly
It is to ensure the accuracy of the coating film.
Wire rods are used as consumables. The frequency of use, the influence of the substrate on the wear of the coating rod, and the maintenance method have a great impact on the replacement cycle. Taking the wire-wound rod as an example, the long-term scraping and proofing will make the wire-wound wire of the wire rod wear and age, resulting in the actual thickness of the coating film becoming smaller. If the cleaning is not clean, the coating film accuracy will be lower, and the extrusion rod is the same. In other words, the longer the use time and the more times of use, the greater the wear and tear caused, resulting in a decrease in the accuracy of the coating film. Therefore, when researchers use the film coating machine, they will regularly replace the wire rods to ensure the accuracy of the coating film. Do you understand?
