Steps
manual mode
Short press the power button to turn on the device.
After short pressing the power button, the instrument prompts whether to perform a new measurement.
Short press the selection key to confirm to start a new measurement.
When the "RUN" logo appears, it means that it has entered the measurement state.
With the instrument facing up, place the test probe under the light source to be tested.
When the test is over, take out the instrument.
Short press the power button to stop the measurement. The screen displays energy value, maximum power, maximum temperature and test duration.
After the test is complete, press and hold to power off.
automatic operation
In the off state, long press the power button to enter the setting mode.
Short press the selection button to select automatic mode, short press to confirm.
Set the power trigger threshold.
Enter the smoothing setting interface and measurement standard setting interface, and perform corresponding settings as required.
Enter the measurement interface, short press the power button to start a new measurement.
With the instrument facing up, place the test probe under the light source to be tested.
When the test is over, take out the instrument.
Short press the power button to stop the measurement. The screen displays energy value, maximum power, maximum temperature and test duration.
After the test is complete, press and hold to power off.
