1. Question: The wire rod does not rotate when the wire rod coater is used, right?
Answer: Yes.
2. Question: Does the wire rod meet the specifications of GB/T13217.1?
Answer: Models K202.10.4, K101.10.5, K202.10.9 and other wire rods are all in line, you can refer to them.
3. Question: Is the thickness of the wire rod adjustable?
Answer: It is not adjustable.
4. Question: Will it be complicated to replace the wire rod of this coating machine? Can it be equipped with OSP wire bar coating?
Answer: Hello, it is not complicated to replace the wire rod of this coating machine. You can also consult our after-sales technology when you replace it at that time, and it can be equipped with OSP wire rod.
5. Question: How many microns is the No. 5 wire rod?
Answer: The wet film thickness corresponding to No. 5 wire rods of different brands is different. For example, the No. 5 wire rod of RDS is 11.4 μm; the No. 5 wire rod of RK is 50 μm; the No. 5 wire rod of OSP is 5 μm.
6. Question: I want to know, I have never used a wire rod, can I apply photosensitive adhesive with a viscosity of 3000cps?
Answer: The viscosity is too high, and the wire rod is not suitable.
7. Question: My solid content is 50%, the coating amount is 3~12g/square, and it is coated on cardboard. What is the wet film thickness of the wire rod?
Answer: 7~25 microns are selected for the wire rod, you can refer to it.
8. Question: The wire rod is used to coat the ink. I don’t know the specific difference between forming and winding. The diameter of the wire rod is 1/4 3/8 1/2 inches. Will the different diameters affect the film formation? What size do you usually buy?
Answer: I will introduce to you the knowledge of hair sticks, the regular one is 3/8, you can refer to it.
9. Question: Will there be streaks on the surface of the film after the wire rod is painted?
Answer: Hello, if the sample fluid coated by the user contains solid particles or the viscosity is too high or the substrate is not smooth, there may be scratches, please refer to it.
10. Question: Is there any domestically produced coating wire rod that is less than 10mm and has a coating film thickness of 2.5um?
Answer: Hello, no, there is no rod size that can achieve such a thick film in domestic wire rods. I can recommend other adapters for you.
