Fineness Gauge

Single-channe, high-quality wear-resistant and corrosion-resistant alloy steel, range 0-150μm, Graduation 7.5μm, groove size 140 × 12.5mm.

Single-channe, high-quality wear-resistant and corrosion-resistant alloy steel, range 0-15μm, Graduation 0.75μm, groove size 140 × 12.5mm.

Single-channe, range 0~25μm, Graduation 1.25μm, stainless steel, scale unit μm.

Single-Channe QXP Fineness gauge, stainless steel, range 0~25μm, scale unit μm, accuracy +/- 2µm, scraper size 170 * 65 * 13mm, Graduation 2.5μm.

Double-channel, range 0~25μm, scale unit μm, scraper material stainless steel, scraper size 175mm * 65mm * 13mm, groove size 140 * 12.5mm, used to determine the fineness of pigments, fillers and impurities in Coatings, in microns.

Single wide-channel, wear-resistant and corrosion-resistant alloy steel, range 0-25μm, Graduation 1.25μm, groove size 140 × 37mm.

Single-channe, range 0~50μm, scale unit μm, scraper material stainless steel, groove size 12.7 * 140mm, scraper material stainless steel, Graduation 2.5μm.

Single-channe Fineness gauge, with a range of 0 to 150 μm, made of stainless steel, is specially used to determine the particle size and dispersion of pigments and impurities in Coatings, paint slurries, inks and other liquids and slurries. The degree of dispersion is expressed by microns or "Hegman"

Single-channe, range 0~100μm, scale unit μm, scraper material stainless steel, groove size 12.7 * 140mm, scraper material stainless steel, scraper size 70mm, Graduation 5μm.

Single-channe, range 0~15μm, scale unit μm, stainless steel, applicable to GB/T 1724, GB/T 13217.3, ISO 1524, ASTM D1210, Graduation 0.75μm.

Double-channel, range 0~100μm, scale unit µm, scraper material stainless steel, scraper size 175 * 65 * 13mm, groove size 140 * 12.5mm, Applicable standards GB/T 1724, GB/T6753.1, ISO1524, recommended range 40~90µm.

Double-channel, wear-resistant and corrosion-resistant alloy steel, range 0-150μm, Graduation 7.5μm, groove size 140 × 12.5mm.

Single-channe, range 0~25μm, Graduation 2.5μm, stainless steel, scale unit μm.

ISO1524 single-channe Fineness of Ground Gauge, stainless steel, range 0 to 50 μm, scale unit μm, Graduation 5 µm, with third-party Measurement certificate. Suitable for fineness determination of 15 to 40 μm slurry.

ISO1524 single-channe Fineness of Ground Gauge, stainless steel, range 0~100μm, scale unit μm, Graduation 10μm, with third-party Measurement certificate. Suitable for fineness determination of 40~90 micron slurry.

ISO1524 single-channe Fineness of Ground Gauge, stainless steel, scale range 0~25μm, scale unit μm, Graduation 2.5µm, with third-party Measurement certificate. Suitable for fineness determination of 5~ 15 micron slurry.

Double-channel, wear-resistant and corrosion-resistant alloy steel, range 0-100μm, Graduation 5μm, groove size 140 × 12.5mm.

Single-channe, high-quality wear-resistant and corrosion-resistant alloy steel, range 0-50μm, Graduation 2.5μm, groove size 140 × 12.5mm.

Double-channel, wear-resistant and corrosion-resistant alloy steel, range 0-50μm, Graduation 2.5μm, groove size 140 × 12.5mm.

Single-channe, high-quality wear-resistant and corrosion-resistant alloy steel, range 0-25μm, Graduation 1.25μm, groove size 140 × 12.5mm.