STIP-scan

Measure pH/mV, conductivity and total dissolved solids (TDS) values, with a large backlit LCD screen, 1 to 5 point button calibrated.

Support pH, Oxidation-reduction potential, dissolved oxygen concentration and saturation multiparameter measurement, automatic identification of pH standard buffer, automatic electrode slope display.

Suitable for outdoor measurement of liquid pH, Oxidation-reduction potential, total dissolved solids (TDS), conductivity, salinity and resistivity values.

Measurement of liquid pH, Oxidation-reduction potential, dissolved oxygen concentration and saturation. -2.000~20.000pH, +/- 1999.9mV, 0.00~20.00mg/L, 0~105 ℃.

pH: 0.00 to 14.00 pH, pH resolution: 0.01 pH, pH Accuracy @25 ℃/77 ° F: +/- 0.05 pH, ORP range: +/- 2000 mV, resolution 1 mV, multiparameter digital HI1036-1802 probe for maintaining water quality in swimming pools, hot baths, hot springs.

Three-channel measurement data, based on Android operating system, including 8 measurement functions, the meter is suitable for outdoor measurement of sample pH, oxidation reduction potential (ORP), Ion concentration, conductivity, total dissolved solids (TDS), salinity, stivity, dissolved oxygen concentration and saturation.

pH/mV/temperature, calibrate intelligent authentication and calibrate reminder function, GLP calibrate record review function, can use the HI92000 data cable to transfer data directly to the PC, can convert the recorded data into real-time Linear dispersion map.

Measurement range: pH-2.00 to 16.00pH, -2.000 to 16.000pH, temperature compensation, micro USB interface to achieve data transmission and charging functions to ensure further analysis and management of measurement data.

Range -pH- 2.00-16 pH (pH- mV conversion: 1000.0 mV), resolution -pH0.01 pH (0.1 mV), accuracy @25 ℃ -pH0.01 pH (0.2 MV), automatic temperature compensation, unique combination of electrochemistry and Colorimetry, not only suitable for laboratory, but also for rapid water quality measurement in the field or in the field.

Two-channel measurement data, based on Android Operating system, including 8 measurement functions, the instrument is suitable for outdoor, aquaculture measurement of sample pH, oxidation reduction potential (ORP), Ion concentration, conductivity, total dissolved solids (TDS), salinity, resistivity.

Bagged pH standard buffer with pH values of 4.01, 7.00 and 10.01 for 250 ml standard solution

At the same time pH, conductivity value, support 1~ 3 point calibrating, automatic temperature compensation, automatic identification of standard solution, PH Measurement range 0.00~14.00pH, PH Measurement accuracy +/- 0.05pH.

Measurement range: PH 2.00 - 16.00pH, ORP 699.9mV, +/-1999mV, built-in three calibrated points, automatic recognition of one or two points calibrated, easy to operate and economical.

Acidity pH range 2.00-16 pH, resolution pH0.01pH (0.1mV), accuracy 0.01pH (0.2MV), automatic temperature compensation, built-in standard calibrate points, nearly 75 water quality measurement items, suitable for laboratory, field or field rapid water quality measurement.

LED Light source, bandpass filter wavelength 525 & 610 nm; Bandwidth 8nm; Wavelength Accuracy +/- 1.0 nm, can be used for the measurement of pH acid alkalinity, calcium ions, nitrate, phosphoric acid and other parameters, is a powerful and widely used water quality analysis instrument.

PC100 desktop pH, Conductivity Meter, conductivity module: 1 point calibrated, reference temperature: 18 ℃, 20 ℃, 25 ℃ optional, support electrode calibration, standard solution calibration, standard series: CH, Europe and the United States optional, measurement can be switched to TDS/salinity/resistivity.

20 meters long, 7 items of important water quality indicators rapid simultaneous measurement, multiparameter integrated electrode design, with IP67 waterproof and anti-skid body and IP68 waterproof electrode, suitable for pipeline or deep well measurement.

-2.000~20.000pH, accuracy +/- 0.002pH, Intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.

The HI98195/20 multiparameter Water Quality Analyzer is equipped with a 20-meter electrode, suitable for deep water and long-distance monitoring. With IP67 waterproof design, it can accurately measure 10 water quality parameters such as pH, conductivity, TDS, etc. Support 45,000 Data storage, USB data transmission and GLP management to meet the needs of multi-scene applications, suitable for long-term monitoring.

Capacitive touch button, 5-point pH automatic recognition calibrate, built-in 8 standard points, 5 custom calibrates; up to four-point EC calibrate and single-point salinity calibrate; 50,000 data/group, with screen measurement and calibrate operation prompts, convenient and fast.