STIP-scan

Detection of zinc content, the range is 0.05mg/L-15mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the "Xylenol Orange Spectrophotometric method, spec-trophotometry" standard.

Measurement range 0.00-5 mg/L, resolution 0.01mg/L, accuracy @25 ℃ reading +/- 3% +/- 0.03mg/L, LED high-quality Light source system, high-quality Optical inspection filter to ensure that the sample measurement results are consistent with the user.

Detect the content of phosphoric acid salt, the range is 0.02mg/L-20mg/L (segmented determination), without digestion, using digestion Colorimetric integrated detection, in line with HJ 670-2013 standard.

Equipped with British original electrodes, based on Android Operating system, 2 to 5 point calibrated, setting menu can customize 12 function parameters, Measurement accuracy: 1% F.S.

Measure the relative and absolute mV value of the sample, based on the Android Operating system, 1 point offset calibrated, the setting menu can customize 10 function parameters, Measurement accuracy 0.2mV.

Measurement range 0 to 200 mg/L (as SiO2), resolution 1 mg/L, accuracy @25 ℃: +/- 1 mg/L +/- 5% of reading, widely used in water treatment, drinking water monitoring, environment protection and industrial process control.

Detect the content of chlorine dioxide, the range is 0.05mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 1 to 2 minutes, and the digestion Colorimetric integrated detection is used.

Range 0-200mg/L, built-in bubble elimination system, with water storage function, invisible near monochrome Infrared source, two-point correction, imported core accessories, can be customized range.

Detection of manganese content, the range is 0.04mg/L-5mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11906-89 standard.

Detect the content of volatile phenols, the range is 0.1mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the HJ503-2009 standard.

Detection of nickel content, the range is 0.1mg/L-4mg/L (segmented determination), no digestion is required, the detection time is 5 to 10 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the GB11910-89 standard.

Measurement range of iron 0.00 to 1.60 mg/L (as Mn), resolution 0.01 mg/L, Mn Measurement range 0 to 300 μg/L (as Mn), resolution 1 μg/L, commonly used in environment monitoring, wastewater treatment, drinking water mass detection and other fields.

Measurement range 0.00-20 mg/L, resolution 0.01mg/L, accuracy @25 ℃: +/- 3 %； +/- 0.5mg/L of reading, commonly used in drinking water monitoring, industrial production process control and other fields to ensure that the concentration of fluoride ions in water is within the safe range.

Residual chlorine Measurement range 0.00 to 5.00 mg/L (as Cl2), resolution 0.01 mg/L, total chlorine Measurement range 0to 500 mg/L (as Cl2), resolution 1 mg/L, using innovative Optical inspection system design, with good accuracy.

Measurement range 0.00 to 3.50 mg/L (as SDBS), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.04 mg/L +/- 3% of reading, widely used in water treatment, environment monitoring, detergent production and detergent residue detection.

Detection of nitrate nitrogen content, the range is 0.5mg/L-10mg/L (measured in sections), no digestion is required, the detection time is 10 to 15 minutes, and the digestion Colorimetric integrated detection is used, which conforms to the standard of "Water Quality, Chromotropic Acid Spectrophotometry".

Measurement range of iron 0.00 to 1.60 mg/L (as Mn), resolution 0.01 mg/L, accuracy @25 ℃: +/- 0.01 mg/L +/- 8% of reading, commonly used in environment monitoring, water quality control, industrial process control and other fields to ensure that the iron concentration in water is within the safe range and meets the requirements of relevant standards and regulations.

Measurement range 0 to 300 μg/L (as Cr (VI)), resolution 1 μg/L, accuracy @25 ℃: +/- 10 μg/L +/- 4% of reading, commonly used in industrial wastewater treatment, environment monitoring and water quality control.

Calcium hardness measurement range 0.00 to 2.70 mg/L (as CaCO3), resolution 0.01 mg/L, high quality Optical inspection filter, unique reference Detector to ensure measurement accuracy and accuracy.

Measurement range 0 to 300 μg/L (as Mn), resolution 1 μg/L, accuracy @25 ℃: +/- 10 μg/L +/- 3% of reading, commonly used in environment monitoring, drinking water mass detection, industrial process control and other fields.

Mg hardness measurement range 0.00 to 2.00 mg/L (as CaCO3), resolution 0.01 mg/L, accuracy @25 ℃ reading +/- 0.11 mg/L +/- 5%; High quality Optical inspection filter to ensure measurement accuracy and accuracy.

Measurement method Noll reagent method, light source wavelength 420nm, Measurement range 0.000~4.000, error of indication ≤ +/- 10%, Repeatability ≤ 3%,

Spectrophotometric method, spectrophotometry, can quickly and accurately measurement of hexavalent chromium in water, support multi-point calibrating and Data storage, can be connected to PC for data collection, with good waterproof and dustproof performance and power management function, suitable for the determination of hexavalent chromium in various water quality needs.