Brand：
$3513.00
SE
TONGAO TR 6900CN Benchtop STIP-scan detection of COD/Total nitrogen
Detect the content of COD and Total nitrogen in water, use the persulfate oxidation method to detect the Total nitrogen value, the measurement error is ≤ +/- 5%, and the built-in thermal printer.
$2692.00
SE
TONGAO TR 6900NHP STIP-scan detection of ammonia nitrogen/Total phosphorus/turbidity/suspended solids
Ammonia nitrogen, total phosphorus, turbidity, suspended solids
Detect ammonia nitrogen, Total phosphorus, turbidity, suspended solids (SS) four parameters, Miscellaneous water quality detection parameters can be expanded, built-in thermal printer, can store 30,000 measurement data.
$3008.00
SE
TONGAO TR 6900NHN Benchtop STIP-scan detection of ammonia nitrogen and Total nitrogen
Ammonia nitrogen, total nitrogen
The content of ammonia nitrogen and Total nitrogen in water was detected, and the digestion Colorimetric integrated tube Colorimetric was used to directly display the results. The HJ535-2009 Knoll reagent Spectrophotometric method, spec-trophotometry and HJ535-2009 Knoll reagent Spectrophotometric method, spec-trophotometry were used.
$2692.00
SE
TONGAO TR 6900B Desktop COD, Ammonia Nitrogen Tester
Detect COD, ammonia nitrogen content, in line with HJ535-2009, HJ/T399-2007 standards, built-in thermal printer, using digestion Colorimetric integrated tube Colorimetric.
$3008.00
SE
TONGAO TR 6900C COD Ammonia nitrogen Total phosphorus turbidity suspension STIP-scan
COD, ammonia nitrogen, total phosphorus, turbidity, suspended solids
Simultaneously detect the content of COD, ammonia nitrogen, Total phosphorus, turbidity, and suspended solids, in line with HJ535-2009, GB11893-89, HJ/T399-2007 standards, using Spectrophotometric method, spectra-trophotometry and direct Colorimetry, built-in thermal printer.
$691.00
SE
HANNA HI8424 Portable pH/ORP/temperature Water Quality Meter
-2.00–16.00pH
Measurement range: PH 2.00 - 16.00pH, ORP 699.9mV, +/-1999mV, built-in three calibrated points, automatic recognition of one or two points calibrated, easy to operate and economical.
$2850.00
SE
TONGAO TR 6900CP Benchtop STIP-scan detection of COD/Total phosphorus/turbidity/suspended solids (SS)
COD, total phosphorus, turbidity, suspended solids
At the same time, the content of COD, Total phosphorus, turbidity and suspended solids (SS) in the water was detected, which met the standards. The built-in thermal printer was used, and the digestion Colorimetric integrated tube Colorimetric was used.
$3198.00
SE
TONGAO TR-308H COD Ammonia Nitrogen Total Phosphorus Turbidity Tester Water Quality Analyzer
COD, ammonia nitrogen, total phosphorus, turbidity
Simultaneously detect COD, ammonia nitrogen, total phosphorus, turbidity parameters, standard digestion instrument and pipette gun, digestion Colorimetric integrated tube detection, Sensitivity up to 0.001mg/L, with power-off protection function.
$2295.00
SE
HANNA HI83314 Desktop acidity pH-COD multiparameter water quality Tester
COD, total nitrogen, total phosphorus and other wastewater treatment digestion parameters- 2.00-16 pH (pH-mV conversion: 1000.0mV)
Acidity pH range 2.00-16 pH, resolution pH0.01pH (0.1mV), accuracy 0.01pH (0.2MV), automatic temperature compensation, built-in standard calibrate points, nearly 75 water quality measurement items, suitable for laboratory, field or field rapid water quality measurement.
$624.00
SE
DDKSIC PH100T Laboratory pH Meter Touch Screen pH/mV (ORP electrode optional)/℃
pH, mV (ORP electrode optional), ℃-2.000~20.000ph
-2.000~20.000pH, accuracy +/- 0.002pH, Intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.
$751.00
SE
HANNA HI97105 multiparameter photometer for seawater
LED Light source, bandpass filter wavelength 525 & 610 nm; Bandwidth 8nm; Wavelength Accuracy +/- 1.0 nm, can be used for the measurement of pH acid alkalinity, calcium ions, nitrate, phosphoric acid and other parameters, is a powerful and widely used water quality analysis instrument.
$2558.00
SE
HANNA HI98196/20 Water Quality Analyzer 20 meters long
0.00~14.00 pH/±600.0 mV
20 meters long, 7 items of important water quality indicators rapid simultaneous measurement, multiparameter integrated electrode design, with IP67 waterproof and anti-skid body and IP68 waterproof electrode, suitable for pipeline or deep well measurement.
$950.00
SE
DDKSIC CD100T touch screen desktop conductivity Dissolved Oxygen Meter conductivity/resistivity/TDS/salinity/dissolved oxygen concentration/dissolved oxygen saturation/℃
Conductivity, resistivity, TDS, salinity, dissolved oxygen concentration, dissolved oxygen saturation, ℃
CD100T desktop touch screen conductivity, Dissolved Oxygen Meter, intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.
$2164.00
SE
HANNA HI5521 Professional desktop multiparameter water quality Tester
0.000 to 9.999、10.00 to 99.99、100.0 to 999.9 mg/L（ppm）；1.000 to 9.999、10.00 to 99.99、100.0 to 400.0 g/L（ppt）；TDS转换系数：1.00-2.0 to 20.0 pH；-2.0 to 20.00；-2.000 to 20.000 pH
Capacitive touch button, 5-point pH automatic recognition calibrate, built-in 8 standard points, 5 custom calibrates; up to four-point EC calibrate and single-point salinity calibrate; 50,000 data/group, with screen measurement and calibrate operation prompts, convenient and fast.
$3300.00
SE
HANNA HI98195 10-parameter water quality analysis Tester 40 meters long
0.00~14.00pH/±600.0mV0~400000Mg/Lorppm (MAX Maximum depends on TDS coefficient)
The HI98195/40 multiparameter Water Quality Analyzer is equipped with a 40-meter electrode for extremely deep water monitoring. With IP67 waterproof performance, it can comprehensively measure pH, conductivity, TDS and other 10 water quality indicators. Support 45,000 Data storage, USB interface and GLP function, suitable for long-term and large-scale water quality monitoring in the most severe environments.
$400.00
SE
HANNA HI98130 High Range pH-EC-TDS- ℃, Water Quality Analyzer
0.00 to 14.00 pH0.00 to 10.00 ppt (g/L)
PH measurement range 0.00 to 14.00 pH, EC measurement range 0.00 to 20.00 mS/cm, TD measurement range S0.00 to 10.00 ppt (g/L), automatic temperature compensation, waterproof design, stable reading, BEPS low battery error prevention system to avoid wrong measurement.
$2882.00
SE
TONGAO TR-208H COD Ammonia Nitrogen Analyzer multiparameter Water Quality Analyzer
COD, ammonia nitrogen
Simultaneously detect COD, ammonia nitrogen parameters, digestion Colorimetric integrated detection, with Pipette and digestion instrument, imported cold Light source, can choose standard measurement or Continuous Measurement mode.
$132.00
SE
Ammonia electrode filler, 480 ml
Gas sensing electrode filling solution, capacity 480 ml
$1287.00
SE
HANNA HI2040 Plate dissolved oxygen - saturated Dissolved Oxygen Meter
Dissolved oxygen range of 0.00~45.00mg/L, with manual, manual continuous and time interval three Data storage mode, support automatic temperature compensation.
$2841.00
SE
HANNA HI98195/20 10-parameter water quality analysis Tester 20 meters long
0~400000Mg/Lorppm (MAX Maximum depends on TDS coefficient)0.00~14.00pH/±600.0mV
The HI98195/20 multiparameter Water Quality Analyzer is equipped with a 20-meter electrode, suitable for deep water and long-distance monitoring. With IP67 waterproof design, it can accurately measure 10 water quality parameters such as pH, conductivity, TDS, etc. Support 45,000 Data storage, USB data transmission and GLP management to meet the needs of multi-scene applications, suitable for long-term monitoring.
$1534.00
SE
DDKSIC PCD100T touch screen desktop pH/conductivity/Dissolved Oxygen Meter
pH, mV (ORP electrode optional), conductivity, resistivity, TDS, salinity, dissolved oxygen concentration, dissolved oxygen saturation, ℃（-2.000~20.000）pH
PCD100T, conductivity module: 1 point calibrated, reference temperature: 18 ℃, 20 ℃, 25 ℃ optional, support electrode calibration, standard solution calibration, standard series: CH, Europe and the United States optional, measurement can be switched to TDS/salinity/resistivity.
$2497.00
SE
HANNA HI5522 Professional desktop multiparameter Water Quality Analyzer (8 parameters)
0.000 to 9.999、10.00 to 99.99、100.0 to 999.9 mg/L（ppm）；1.000 to 9.999、10.00 to 99.99、100.0 to 400.0 g/L（ppt）；TDS转换系数：1.00-2.0 to 20.0 pH；-2.0 to 20.00；-2.000 to 20.000 pH
Measurement range: -2.000 to 20.000 pH, ORP/mV: +/-2000.0 mV, ISE: 1.00 x 10-6 to 9.99 x 1010 Ion concentration units, linear and non-linear temperature compensation, choice of three salinity measurement ranges, up to four point EC calibrated and single point salinity calibrated.
$1434.00
SE
HANNA HI2030 Plate EC-TDS- salinity - temperature measuring instrument
-20.0 to 120.0℃（ -4.0 to 248.0℉)
Configure HI763100 conductivity dedicated electrode, support manual, manual continuous and time interval three storage modes, with automatic temperature compensation.
$1024.00
SE
HANNA HI2020 edge large screen flat panel pH & pH-mV Tester
-20.0 to 120.0℃（ -4.0 to 248.0℉)±1000mV-2.00 to 16.00pH, -2.000 to 16.000pH (standard mode)
Laboratory, hanging and portable three use modes, ultra-thin and lightweight Appearance design, 5.5-inch large-screen LCD display, touch key operation, unique data type intelligent electrode, automatic identification, fault diagnosis.
$648.00
SE
DDKSIC DO100T laboratory Dissolved Oxygen Meter (polarographic type) dissolved oxygen concentration/dissolved oxygen saturation/℃
Dissolved oxygen concentration, dissolved oxygen saturation, ℃
0.00~20.00Mg/L, accuracy +/- 0.30mg/L, Intelligent Operating system, with electrode management, data management, parameter setting, data locking, Automatic calibration and other functions.
$929.00
SE
DDKSIC PCD10 Portable multiparameter analyzer (color screen)
pH, mV (ORP electrode optional), conductivity, resistivity, TDS, salinity, dissolved oxygen concentration, dissolved oxygen saturation, ℃(-2.000~20.000)pH
PCD10, conductivity module: 1 point calibrate, automatically identify calibrated solution, support electrode calibration, standard solution calibration, can be switched to TDS/salinity/resistivity, reference temperature can be set according to the sample solution.
$2475.00
SE
HANNA HI98195/10 10-parameter water quality analysis Tester 10 meters long
0~400000Mg/Lorppm (MAX Maximum depends on TDS coefficient)0.00~14.00pH/±600.0mV
The HI98195/10 multiparameter Water Quality Analyzer is equipped with a 10-meter electrode, suitable for deep water quality monitoring. With IP67 waterproof performance, it can quickly measure 10 water quality indicators such as pH, ORP, conductivity, etc. Support 45,000 Data storage, USB interface and GLP function, suitable for long-term data collection and analysis in complex wild environments.
$376.00
SE
LEICI DGB-402A Portable residual chlorine total chlorine Tester
Residual chlorine/total chlorine: (0.02~ 3.00) mg/L
Measurement range residual chlorine/total chlorine: 0.00~3.00mg/L, resolution concentration: 0.01mg/L; Absorbance: 0.001ABS, microcontroller technology, multi-point calibrating, Data storage, waterproof and dustproof.
$1767.00
SE
LEICI DGB-480 multiparameter Water Quality Analyzer
TurbidityAbsorptionTransmittanceChromaTransmittance (0~100.0) %0~1.500Abs（420nm、470nm、620nm）；0~2.000Abs（515nm、540nm、650nm）0.50~50.0NTU、50.0~500NTU0~50 degrees
$3177.00
SE
HANNA HI98196/40 Water Quality Analyzer 40 meters long
0.00~14.00 pH/±600.0 mV
40 meters of wire, IP67 waterproof and anti-skid body and IP68 waterproof electrode, support up to seven water quality indicators of rapid simultaneous measurement, can install pH (ORP), EC electrode
If you don't know how to choose "STIP-scan", please consult customer service.