Tensile Machine

Range 1000KG, Measurement accuracy +/- 0.01N, effective stroke 700mm, built-in micro printer, resolution 1/200000, for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Using high-precision, non-clearance ball screw and timing belt as the guarantee of transmission system accuracy, fully computerized data collection and motion control, force measurement accuracy of 0.5 level, 1/300000 force value resolution.

Force range of 10kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

Capacity 5T, force measurement accuracy +/- 0.5%, force measurement resolution 1/300000, effective force measurement range 1~ 100% F.S., can be used to test tensile, compression, bending, shearing, disbonding, tearing and other mechanical properties.

Measurement accuracy +/- 0.1N, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Adopt ball screw drive and high-end stepper motor, equipped with large screen touch display, real-time display of test data, and support printing tensile strength, elongation and other results. Built-in micro-printer, with automatic reset, data memory and overload protection functions.

Capacity 0~300kg, accuracy level 0.5, force range 0.02/100 -100%, using imported electrical components, with peak holding, sample breaking stop function, support stepless speed regulation.

Force measuring range of 50kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, specimen breakpoint sensing.

Maximum test force 5000N, test force level 1, test force Measurement range 2% --100% FS, beam displacement Measurement accuracy resolution higher than 0.01mm, Test speed range 0.1-500mm/min, stepless speed regulation.

Measurement accuracy +/- 0.01N, built-in micro-printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Maximum test force 50KN, accuracy class 0.5, test force Measurement range 1%~ 100% FS (full scale), deformation Measurement range 0.2%~ 100% FS, deformation error of indication indication within +/- 0.5%, Displacement resolution 0.01mm.

Maximum test force 5000N, accuracy class 0.5, test force Measurement range 1%~ 100% FS (full scale), deformation Measurement range 0.2%~ 100% FS, deformation error of indication indication within +/- 0.5%.

Maximum test force 2000N, accuracy level 0.5, support tensile, compression, bending, shear and other test modes, with powerful Linear dispersion analysis and custom report functions.

With 0.5 accuracy and 100N maximum test force, it supports tensile, compression, bending, shear and other test modes, and can be tested according to GB, ISO, ASTM and other standards, providing powerful data and Linear dispersion analysis functions.

Using servo motor and precision ball screw drive, high control accuracy, low noise. Maximum test force 20N, accuracy class 0.5, with a variety of control modes and powerful Linear dispersion analysis function.

Maximum test force 500N, accuracy level 0.5, support tensile, compression, bending and other test modes, with powerful data Linear dispersion analysis function and flexible report editing system.

Using servo motor and synchronous toothed belt to drive high-precision ball screw, the displacement rate adjustment in a wide range of 0.01~ 500mm/min is realized, the test force Indication Error is within +/- 0.5%, and it has a variety of control modes and powerful Linear dispersion analysis function.

Servo motor and synchronous toothed belt drive high precision ball screw, high control accuracy, low noise. Maximum test force 50N, accuracy class 0.5, support for fixed speed, positioning, fixed force and other complex control mode.

Measurement accuracy +/- 0.1N, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Measurement accuracy +/- 0.01N, effective stroke 700mm, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. LCD real-time display, touch key operation, support Linear dispersion analysis and various test modes. With closed-loop control, peak hold, overload protection functions, speed range 1-500mm/min

Maximum test force 100KN, accuracy class 0.5, test error of indication indication within 0.5%, deformation Measurement range 0.2%~ 100% FS, Displacement resolution 0.01mm.

Range 50KN, load Graduation 0.001KN, with four test modes, four rail column structure, Graduation can be set freely, support automatic transmission and reset, qualified judgment, overload and leakage protection functions.

Range 50N, load Graduation 0.001N, Test space 220mm, 7-inch touch screen, four test modes, with its own micro printer, in line with JB/T7796-2017 standard.