Flaw Detector

6000Mm large range to meet a variety of detection needs, equipped with high-performance lithium battery can work continuously for more than 10 hours, support full digital true color display and a variety of probe adaptation, suitable for harsh Operating Conditions environment

Support DAC Linear dispersion automatic generation and correction, maximum 6 meters range echo signal processing, 10 independent flaw detection channels freely set, 5.7 inch TFT color screen display, easy to operate.

Scanning range 0~6000mm, high-precision positioning, three-proof design, with Automatic calibration, automatic display of defect echo position, 100 individual inspection channels, with gain compensation and φ value calculation function.

640 * 480 high definition resolution display waveform fine, Repeability Frequency up to 2000Hz detection efficiency, with 360 degree swirl/spin damping bracket easy to operate, support unlimited video and playback function for Data analysis.

Full Chinese touch keyboard, intuitive and easy to remember, automatic measurement of probe performance, measurement of thickness and Speed of sound. Ten independent flaw detection channels, no need to carry test blocks for on-site flaw detection. Real-time display of defect echoes and display of weld profiles.

Scanning range 0~1000mm, vertical Linearity < 3%, localizable and qualitative defects, Automatic calibration, Linear dispersion automatic generation, unlimited sampling points, four probe Operating Modes.

Lithium battery power for 8 hours, with waterproof and dustproof function, supports 100 flaw detection channels and 300 A-shaped graphic storage, suitable for nondestructive detection in a variety of complex environments.

Adopting the principle of magnetic field magnetization workpiece design, lifting force up to 7.5Kg, equipped with 3W LED lighting, adjustable movable joints, suitable for nondestructive testing of various shapes of workpieces.

Can be adapted to electromagnetic yoke probe, horseshoe probe, magnetic ring three different probes, standard horseshoe yoke fillet weld probe, pole distance 20~160mm, thyristor switch, low Voltage output.

Frequency range 64Hz-2MHz, gain 0-48dB, the use of penetrating probe can detect defects in the inner wall of the tube, with automatic zero calibration system and sound and light alarm output, suitable for a variety of metal material detection.

130dB high gain ensures detection sensitivity, intelligent one-click calibrating simplifies the operation process, supports unlimited recording and dynamic playback, and meets the needs of flaw detection in a variety of complex environments.

One-piece molding, magnetizing pole distance 0~220mm, in line with JB/T7411 standard, suitable for hull weld inspection, steel structure weld inspection and internal operation of Pressure Vessel.

Lithium battery power supply can work for 8 hours, with 100 flaw detection channels and 300 graphics storage capacity, support three probe modes and automatic alarm function, adapt to -27~ 70 ℃ Operating Environment.

Magnetized pole distance 0~220mm, DC, AC two power supply mode optional, in line with JB/T7411 standard, load ratio of 50%, suitable for boiler, Pressure Vessel, pressure pipeline.

Scanning range 0~6000mm, 16 flaw detection channels, can store 980 A-scan images, Automatic calibration probe, 16 flaw detection channels, 4 kinds of weld type diagram function, can automatically display echo related parameters.

With 120dB gain range and 0.4~ 20.0MHz frequency band, it supports ten independent flaw detection channels, can automatically generate DAC, AVG Linear dispersion, real-time display defect echo, suitable for a variety of material inspection.

The single gate and double gate reading methods are optional, the peak reading and edge detection in the gate are optional, and the echo envelope waveform is used to facilitate manual experience judgment.