Densitometer

Suitable for rubber, plastic, metal, Ceramics and other materials. With rapid testing, automatic zero tracking, temperature compensation and other functions, support multiple measurements on site, and use corrosion-resistant high-mass accessories

Adopt precision electronic balance and unique conversion program to quickly and accurately measure the fineness, purity and gold K number of precious metals, with temperature and solution compensation functions, support gold K number, mixed specific gravity and other tests, and no trace pollution after measurement. Equipped with transparent, corrosion-resistant sink, and can be connected to computer and printer.

The solid Density Meter adopts German HBM imported Sensors, better measurement repeability, two steps to directly read the Density of any solid, particle, floating material, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel hanging wire, no bending and deformation, vertical with the hanging bar does not touch the sink, can determine the main material content%.

Measurement of precious metal fineness, purity and gold K number, easy to operate and no trace pollution. With temperature compensation, mixed specific gravity measurement and other functions, the transparent corrosion-resistant sink is easy to use, and supports connection with computers and printers

Three stations, Tapping Frequency 250 rpm, swirling/spinning mode, measuring flask volume 25mL, 100mL, suitable for metal powder, Non-metallic powder, pharmaceutical, chemical, new energy.

The Aquimide buoyancy method supports temperature and solution compensation and is suitable for a variety of materials including particles, floats, liquids and colloids. Its large-capacity sink design enables measurement of larger objects and has an RS-232 interface for easy data transfer

Using German HBM imported Sensors, with XIONGFA self-produced Density components, quickly test the Density and volume of various solids! Simple and fast operation!

Weighing range 0.005~ 300g, Density accuracy 0.001g/cm ³, Density measurement range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time about 5 seconds, the results show Density, concentration value.

Sensors imported from German HBM, Weighing range 0.001~ 300g, Density accuracy 0.0001g/cm ³, Density measurement range 0.0001~ 99.9999g/cm ³, test time about 5 seconds, measurement types Solid, granular, film, floating body, the results show Density, volume

Using German HBM imported Sensors, using integrated molding corrosion-resistant large sink design, optional liquid accessories, you can test the liquid Density and concentration.

Adopting the Archimedes principle, it supports high-accuracy measurement of solid and liquid Density. Its large-capacity sink design is suitable for large objects, with temperature and solution compensation functions, easy operation, and intuitive digital display, suitable for rapid multiple tests. The device meets many international standards and has an RS-232C interface

Suitable for high accuracy Density testing of large parts, with a large Weighing range and extremely high Density resolution accuracy. Its fully automatic calibration and environment automatic adjustment functions ensure fast and easy measurement

In line with GB/T 16913-2008 standard, the diameter of the outflow port is φ 5mm, which is suitable for the measurement of the resting angle of the powder using the injection-defined bottom surface method.

Adopt Archimedes principle buoyancy method to accurately read the measured value directly. Weighing range 0.005~ 600g, Density accuracy 0.001g/cm ³, data interface RS232C,

Density resolution 0.0001g/cm3, sexual repeability +/- 0.0008g/cm3, test range 0001-1.9999 g/cm3, temperature resolution 0.01 ℃, sexual repeability +/- 0.1 ℃, temperature control method Paltier temperature control, Temperature range 5 ℃ -35 ℃

Three stations, support the 2020 version of Chinese Pharmacopoeia standard, built-in small printer, can directly download electronic reports, standard electronic scales, suitable for pharmaceutical and chemical testing.

Density resolution 0.0001g/cm3, sexual repeability +/- 0.0003g/cm3, test range 0001-1.9999 g/cm3, temperature resolution 0.01 ℃, sexual repeability +/- 0.1 ℃, temperature control method Paltier temperature control, Temperature range 5 ℃ -35 ℃, test method U-shaped vibration tube method

Suitable for rubber, plastic, metal, Ceramics and other materials. It is easy to operate, with rapid testing, automatic zero tracking, temperature compensation and other functions, suitable for multiple measurements on site

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.