Densitometer

Using German HBM imported Sensors, better measurement repeatability, two steps to directly read any solid, particle, floating material Density, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel cable, no bending and deformation, vertical with the hanging railing does not touch the sink, can determine the main material content%.

Using the Archimedes principle, it has the function of high accuracy and fast measurement of solid and liquid Density. It is easy to operate, stable and durable, and is equipped with a large-capacity sink to support multiple continuous tests.

Density volume of solid, granular, thin film and floating body can be measured, the measurement range is 0.01g~ 300g, and the Density accuracy is 0.001g/cm3. Density value can be displayed in only two steps with water as medium.

Can quickly and accurately determine the fineness, purity and gold K number of precious metals, easy to operate and no trace pollution. With temperature compensation, mixed specific gravity measurement function, corrosion-resistant transparent sink design, support connection with computers and printers

Economical type, Weighing range 0.01g~ 600g, Density accuracy 0.001g/cm ³, Density measurement range 0.001~ 99.999g/cm ³, measurement type Solid, granular, film, floating body

Direct reading Density and volume of solid blocks, particles, and floating bodies with Density > 1 or < 1 in any shape. 0.01g~ 900g weight measurement range, 0.01g/cm3 Density accuracy

Suitable for rubber, plastic, metal, Ceramics and other materials. With rapid testing, automatic zero tracking, temperature compensation and other functions, support multiple measurements on site, and use corrosion-resistant high-mass accessories

Using German HBM imported Sensors, with XIONGFA self-produced Density components, quickly test the Density and volume of various solids! Simple and fast operation!

Adopting the Archimedes principle, it supports high-accuracy measurement of solid and liquid Density. Its large-capacity sink design is suitable for large objects, with temperature and solution compensation functions, easy operation, and intuitive digital display, suitable for rapid multiple tests. The device meets many international standards and has an RS-232C interface

Weighing range 0.01g~ 300g, density resolution 0.001 g/cm3, Measurement time about 10 seconds, setting function solution compensation setting, measurement function weight, density, volume.

Suitable for rubber, plastic, metal, Ceramics and other materials. It is easy to operate, with rapid testing, automatic zero tracking, temperature compensation and other functions, suitable for multiple measurements on site

Weighing 310g, weighing accuracy 0.01g, Density accuracy 0.01g/cm ³, pan size 60x152mm, LCD liquid crystal display, optional Density rack.

Measurement range 0.1g/cm ³~ 1.2g/cm ³, Accuracy ≤ +/- 0.01g/cm ³, resolution 0.01g/cm ³, low Voltage prompt √, automatic shutdown function √, working Environmental temperature: 0 ℃~ 50 ℃; Humidity: < 80% RH.

The Weighing range is 0.01g-300g, the weighing accuracy is 0.01g, the density accuracy is 0.001g/cm3, the specific gravity range is > 1, < 1 can be tested, and the solution compensation setting can be freely set.

Weighing range 0.01g~ 600g, density resolution 0.001 g/cm3, Measurement time about 10 seconds, setting function solution compensation setting, measurement function weight, density, volume.

Using Archimedes principle, equipped with high-performance 32-bit ARM processor and German HBM Sensors, with 5-inch touch screen, intelligent pinyin input, automatic storage of 100 sets of data, Density upper and lower limit determination and a variety of printing functions

Indentation Density Meter for wood density measurement, Accuracy ≤ +/- 0.01g/cm3, Measurement range 0.01g/cm3~ 1.2g/cm3, Resolution 0.01g/cm3.

Weighing range 0~200g, Readability 10mg, Net weight 1000g Arch frame H = 203mm, measurement platen φ 110.

Weighing range 0~100g, Minimum Weight 10mg, Arch frame H = 203mm, measurement platen φ 110.