Densitometer

Using German HBM imported Sensors, better measurement repeatability, two steps to directly read any solid, particle, floating material Density, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel cable, no bending and deformation, vertical with the hanging railing does not touch the sink, can determine the main material content%.

Weighing range 0.01~ 600g, Density accuracy 0.001g/cm ³, Density measuring range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time is about 5 seconds, the results show Density and concentration values.

Using the Archimedes principle, it has the function of high accuracy and fast measurement of solid and liquid Density. It is easy to operate, stable and durable, and is equipped with a large-capacity sink to support multiple continuous tests.

Density volume of solid, granular, thin film and floating body can be measured, the measurement range is 0.01g~ 300g, and the Density accuracy is 0.001g/cm3. Density value can be displayed in only two steps with water as medium.

Based on Archimedes principle, equipped with high-performance 32-bit ARM processor and German HBM Sensors to ensure accurate and efficient Density measurement. Equipped with 5-inch touchscreen, intelligent pinyin input, automatic storage of 100 sets of data, and support for a variety of printing methods

Economical type, Weighing range 0.01g~ 600g, Density accuracy 0.001g/cm ³, Density measurement range 0.001~ 99.999g/cm ³, measurement type Solid, granular, film, floating body

Compared with the traditional Wechsler Balance method and Density Cup method, the operation is simpler, and it is not affected by external factors and temperature, so as to achieve fast and accurate measurement, which is suitable for applications such as quality management, formula development, and cost control.

Suitable for rubber, plastic, metal, Ceramics and other materials. With rapid testing, automatic zero tracking, temperature compensation and other functions, support multiple measurements on site, and use corrosion-resistant high-mass accessories

Measurement of precious metal fineness, purity and gold K number, easy to operate and no trace pollution. With temperature compensation, mixed specific gravity measurement and other functions, the transparent corrosion-resistant sink is easy to use, and supports connection with computers and printers

Using German HBM imported Sensors, with XIONGFA self-produced Density components, quickly test the Density and volume of various solids! Simple and fast operation!

Adopting the Archimedes principle, it supports high-accuracy measurement of solid and liquid Density. Its large-capacity sink design is suitable for large objects, with temperature and solution compensation functions, easy operation, and intuitive digital display, suitable for rapid multiple tests. The device meets many international standards and has an RS-232C interface

Suitable for rubber, plastic, metal, Ceramics and other materials. It is easy to operate, with rapid testing, automatic zero tracking, temperature compensation and other functions, suitable for multiple measurements on site

Weighing 310g, weighing accuracy 0.01g, Density accuracy 0.01g/cm ³, pan size 60x152mm, LCD liquid crystal display, optional Density rack.

Indentation Density Meter for wood density measurement, Accuracy ≤ +/- 0.01g/cm3, Measurement range 0.01g/cm3~ 1.2g/cm3, Resolution 0.01g/cm3.

Weighing range 0~200g, Readability 10mg, Net weight 1000g Arch frame H = 203mm, measurement platen φ 110.

Weighing range 0~100g, Minimum Weight 10mg, Arch frame H = 203mm, measurement platen φ 110.

Weighing range 300g, Readability 0.01g, Linearity +/- 0.02g, Repeatability Error +/- 0.01g, Dimension 190 * 250 * 250mm, Packaging Dimensions 560 * 300 * 210mm, support standard weight volume calibration.