Densitometer

In line with the national standard GB5060-85 design, 304 stainless steel funnel, Cube funnel and quartz Glass baffle to ensure test accuracy and stability. The equipment has an easy-to-clean design, easy to operate, and is suitable for high-accuracy powder Density testing.

Density and volume of any shape (solid block, particle, floating body) can be measured, with temperature compensation, RS232 interface, built-in battery can be measured on site

Range 0.005~ 300g, 0.001g/cm3 accuracy; solid liquid dual-use; with RS232C interface; with Wind Shield, temperature compensation can be set, in line with a variety of standards.

Archimedes principle, Density measurement range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time about 5 seconds, the results show Density, concentration value, suitable for chemical, food, petroleum and other fields of high viscosity, suspension, emulsion, colloidal liquid Density test.

Fast, accurate determination of gold purity and K value, easy to operate and does not damage the sample. It has a wide K number range and mixed specific gravity test function, suitable for a variety of precious metals, in line with national standards

Quick, accurate determination of gold purity, K-value and Density, easy to operate and non-polluting, suitable for testing a wide range of precious metals. It supports wide K-number ranges and mixed specific gravity determination, with special software design and large sink design

Adopt precision electronic balance and unique conversion program to quickly and accurately measure the fineness, purity and gold K number of precious metals, with temperature and solution compensation functions, support gold K number, mixed specific gravity and other tests, and no trace pollution after measurement. Equipped with transparent, corrosion-resistant sink, and can be connected to computer and printer.

The solid Density Meter adopts German HBM imported Sensors, better measurement repeability, two steps to directly read the Density of any solid, particle, floating material, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel hanging wire, no bending and deformation, vertical with the hanging bar does not touch the sink, can determine the main material content%.

Weighing range 0.001~ 200g, Density accuracy 0.0001g/cm ³, Density measurement range 0.0001~ 99.9999g/cm ³, test time about 5 seconds, measurement types Solid, granular, film, floating body, the results show Density, volume

Weighing range 0.005~ 300g, Density accuracy 0.001g/cm ³, Density measurement range 0.001~ 2.200g/cm ³, concentration range 0.1%~ 100.0%, test time about 5 seconds, the results show Density, concentration value.

Sensors imported from German HBM, Weighing range 0.001~ 300g, Density accuracy 0.0001g/cm ³, Density measurement range 0.0001~ 99.9999g/cm ³, test time about 5 seconds, measurement types Solid, granular, film, floating body, the results show Density, volume

Using German HBM imported Sensors, using integrated molding corrosion-resistant large sink design, optional liquid accessories, you can test the liquid Density and concentration.

Adopt Archimedes principle buoyancy method to accurately read the measured value directly. Weighing range 0.005~ 600g, Density accuracy 0.001g/cm ³, data interface RS232C,

In line with GB/T 16913-2008 standard, the diameter of the outflow port is φ 5mm, which is suitable for the measurement of the resting angle of the powder using the injection-defined bottom surface method.

The use of Archimedes buoyancy method, high accuracy and easy operation, suitable for a variety of samples. Its large-capacity sink design and RS-232 interface facilitate field testing and data transmission. The device has temperature and solution compensation functions to support fast and continuous testing

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.

In line with GB/T 1482-2010 standard, suitable for the determination of metal powder flowability by standard funnel method, with 25ml stainless steel measuringflask.

Using 7 inch wireless touch screen, combined with Archimedes principle, accurate measurement of various liquid Density, accuracy of 0.001g/cm ³. With dynamic measurement function, support real-time update Density value, suitable for a variety of liquids (including viscous, volatile, corrosive liquids, etc.).

Using 7-inch wireless touch screen, combined with Archimedes principle, accurate measurement of various liquid Density, measurement accuracy up to 0.0001g/cm ³. Its split design avoids liquid penetration, supports dynamic measurement and real-time data update, easy operation, auto calibration

Weighing 310g, weighing accuracy 0.005g, Density accuracy 0.001g/cm ³, pan size Φ50mm top plate, direct display of sample Density, built-in multiple Density references.

Weighing 210g, weighing accuracy 0.001g, Density accuracy 0.001g/cm ³, 60x152mm pan size, direct display of sample Density, built-in multiple Density references.

Loose Bulk Density for powder measurement, designed to meet GB/T 1479.2-2011 standards, and the baffle box is easy to remove and clean.

Using Archimedes principle, equipped with high-performance 32-bit ARM processor and German HBM Sensors, 5-inch touch screen, supports intelligent pinyin input, automatic storage of 100 sets of data, Density upper and lower limit determination and a variety of printing methods, accurate and efficient measurement, suitable for a variety of irregular solid, particle and floating body Density test.