Gas detector

Conventional, leak detection, optional PID, High Sensitivity Intelligent Sensors and Low Power MCU chip design, support 4-20mA, RS485, 4G, Wi-Fi and other wired and wireless signal output, explosive aluminum alloy shell.

Using 32-bit embedded microcomputer chip and 16-bit high-resolution ADC chip, the detection accuracy ≤ +/- 3%, the Response speed is fast, and it has 4000 alarm record storage and Linear dispersion diagram drawing function.

It can measure any 4 combinations of more than 600 kinds of gases, and has general and special customized models. It integrates photography, camera and lighting. It is easy to switch between pump suction and diffusion sampling. It supports wireless networking. It has a long battery life of 3500mA lithium battery. It is easy to operate in both Chinese and English. The protection reaches IP65 level

Leak detection, can not be used in the flue gas environment, intelligent Sensors and MCU chips, support a variety of signal output methods, but also support wireless data transmission (such as LORA, 4G, WiFi, etc.).

Infrared, 1% high-precision, Sensors life of 10 years, advanced infrared NDIR detection principle, detection range of 0-3% Vol (optional 100% LEL), low power MCU chip and intelligent Sensors, support 4-20mA, RS485, switch and other signal output.

Conventional, leak detection, optional PID, Smart Sensors and low power MCU chip design, support 4-20mA, RS485 and a variety of wireless signal output, aluminum alloy explosion-proof housing is rugged and durable.

Humidity detection range: 0-100% RH, resolution 0.01ppm, detection gas ozone (O3), detection range 0.01-50 ppm, detection principle imported electrochemistry, detection method pump suction type, air pump flow rate: 500-1000mL/min adjustable (30 level fine-tuning)

Detection gas type CO2, detection range 0~5000ppm, error of indication 3% FS, Repeatability 1%, Working Temperature & Moisture -40 ℃~ 55 ℃, 10% -95% RH (no condensation), storage temperature -10 ℃~ 30 ℃

High temperature within 260 degrees, Anti-Impact poisoning, catalytic combustion detection principle and intelligent MCU chip, Sensors life of 2 to 3 years, high definition LCD LCD screen, Chinese and English interface switching and remote control adjustment function.

Ordinary performance, intelligent Sensors and MCU chips, support a variety of signal output (4-20mA, RS485, wireless transmission, etc.) and remote monitoring, with flameproof design and high definition LCD display.

Gas name and alias H2S, detection range 0-500ppm, error of indication 3% FS, Repeatability 1%, Operating Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), storage temperature -10 ℃~ 30 ℃

Temperature detection range: -40~120 ℃, humidity detection range: 0-100% RH, resolution 0.001ppm, detection gas ozone (O3), detection accuracy ≤ +/- 3% F.S, detection range 0.001-5ppm, detection principle imported electrochemistry, detection method pump suction

Support 4 kinds of gas detection at the same time, there are general and customized special models, protection up to IP67 waterproof, 10 meters anti-drop, two-color mode anti-skid, Alarm mode is diverse, alarm value is adjustable. High definition color screen has no backlight visual, lithium battery charging fast, long battery life, support multi-mode software upgrade

High performance, online detection, MCU chip and intelligent Sensors technology, wireless transmission (such as LORA, 4G, WiFi, etc.), providing remote monitoring and data recording functions, LCDTFT high definition display.

Conventional, high performance, optional PID, detection range of 0-100ppm, support a variety of signal output, intelligent Sensors, efficient alarm, remote monitoring and easy operation.

Detection range 0~10ppm, error of indication 3% FS, Repeatability 1%, Operating Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), Storage temperature -10 ℃~ 30 ℃

Leak measurement, can not be used in flue gas environment, using catalytic combustion principle, low power MCU chip and intelligent Sensors technology, with aluminum alloy explosion-proof housing and sound and light alarm function.

High performance, flue gas online detection and analysis, only NO or NO2 is measured, and the sum of the measurements requires NO + NO2 + O2 conversion values (three Sensors), and supports wireless transmission (such as LORA, 4G, WiFi, etc.).

Conventional, referred to as TMA, optional thermal conductivity, intelligent Sensors and MCU chips, while supporting a variety of signal output (4-20mA, RS485, switching, etc.), with remote monitoring and alarm functions.

Gas name and alias O2, detection range 0-30% VOL, error of indication 3% FS, Repeatability 1%, Operating Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃, Operating humidity: 10% -95% RH (no condensation)

Gas name and alias O2, detection range 0-30% VOL, error of indication 1%, Repeatability 3% FS, Operating Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), Response time T90 ≤ national standard

Detection gas type O3, detection range 0~100ppm, Working Temperature & Moisture -40 ℃~ 55 ℃, 10% -95% RH (no condensation), Storage temperature -10 ℃~ 30 ℃, error of indication 3% FS, Repeatability 1%

Detection gas type O2, detection range 0-30% VOL, Response time T90 ≤ national standard, error of indication 3% FS, Repeatability 1%, Working Temperature & Moisture -40 ℃~ 55 ℃, 10% -95% RH (no condensation), Storage temperature -10 ℃~ 30 ℃

Conventional, leak detection, optional PID, high-precision intelligent Sensors and low-power MCU chip design, high definition LCD display and local sound and light alarm function, flameproof aluminum alloy shell, through a number of international safety certifications.