Gas detector

Halogen gas, SF-6, response time instantaneous, warm-up period < 6 seconds, continuous working time 5 hours, sensitivity to halogen refrigerant 3 gr/year, low power indication 3.3V +/- 0.2V, operating temperature 0~52 ℃, sensitivity adjustable

Electrochemical sensor principle, pump suction sampling, detection of hydrogen sulfide gas, range 0-50ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

Detect oxygen concentration, dust-proof design and water gas filtrate, equipped with dust Filter, built-in micro air pump, original imported high-precision Sensors, full software Automatic calibration, range 0-30% Vol.

Simultaneously detect H2S, NO2, O3, NH3 four gases, pump suction sampling, using imported electrochemistry gas Sensors, real-time detection, real-time storage, explosion-proof signs Ex ia ⅱ C T4 Ga.

Measurement range 0~50ppm, resolution 0.01ppm, detection accuracy ≤ +/- 3%.

Display error +/- 5% FS, response time ≤ 15 seconds, Sensors life of 2 years, measurement range 0-100% LEL, resolution 1% LEL, provide replaceable in-line module Sensors.

Simultaneously detect combustible gas, hydrogen sulfide, oxygen, explosion-proof mark Ex ia ⅱ C T4 Ga, detection accuracy ≤ +/- 3%, Linearity ≤ +/- 1%, Sampling method pump suction.

Electrochemistry principle, pump suction sampling, detection of sulfur dioxide gas, range 0~10ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

Measurement range 0-1000PPM, resolution 1ppm, diffusion sampling, highly waterproof design, Sensors fault self-test, Automatic calibration function, two-stage triple alarm, replaceable in-line module Sensors.

Detect chlorine concentration, range 0-10PPM, using imported Sensors, 2.4-inch industrial-grade color screen, sound and light alarm, can set real-time detection, timing detection.

Detect NH3 gas concentration, range 100ppm, resolution 0.1ppm, diffusion sampling, highly waterproof design, Sensors fault self-test, Automatic calibration, two-stage triple alarm, replaceable in-line module Sensors.

Electrochemistry principle, pump suction sampling, detection of combustible gas, range 0~5ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

It can monitor the PM2.5 concentration in the air in real time (0~999μg/m ³) and provide intuitive data. The product has a sound and light alarm function, which automatically reminds when the air mass is not up to standard to ensure the health of the family.

Measurement range: PM2.5 dust particles 0~999ug/m3; PM10 dust particles 0~999ug/m3; TVCO organic volatiles 0~5.00mg/m3; C6H6 benzene 0~3.00mg/m3, can achieve 24 hours uninterrupted recording and analysis of environment air mass conditions; provide real-time, periodic data.

Simultaneous detection of carbon monoxide, hydrogen sulfide, oxygen, built-in 4000mA large capacity polymer rechargeable battery, detection accuracy ≤ +/- 3%, Linearity ≤ +/- 1%, Sampling method pump suction.

Adjustable sensitivity to detect halogen gas leaks of less than 0.5 oz/year. Fast Response and warm-up period of less than 90 seconds ensure efficient detection. It is equipped with a 1200mAh lithium battery that provides 5 hours of continuous operation and supports charging function.

Detect H2S gas concentration, range 100ppm, resolution 0.1ppm, diffusion sampling, highly waterproof design, Sensors fault self-test, Automatic calibration, two-stage triple alarm, replaceable in-line module Sensors.

Detection gas CO, range 0~1000ppm, resolution 1ppm, intrinsic error +/- 5% or +/- 10PPM

Pump suction, semiconductor nano process, low power consumption, test tetrahydrothiophene THT gas, range 0-50mg/m3, with a variety of detection modes, with temperature compensation function.

Imported high accuracy Sensors, pump suction, while detecting combustible gas, oxygen, carbon monoxide, hydrogen sulfide four gases, explosion-proof circuit design.