Gas detector

General catalytic combustion Sensors, catalytic combustion detection principle and MCU low power chip, support a variety of signal output (4-20mA, RS485, wireless transmission) and remote data monitoring.

NH3, range 0~50ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Conventional, leak detection, intelligent sensor and MCU chip technology, support a variety of signal output methods (such as 4-20mA, RS485, switching value), with explosion protection function (Ex db IIC T6 Gb).

Electrochemical sensor, detection of gas CO, range 1~ 1000ppm, resolution 1ppm, detection accuracy +/- 10%, response time < 60s, buzzer alarm

O2, range 0~30% vol, resolution 0.01% vol, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Detect R134a gas concentration, commonly known as tetrafluoroethane, detection range 0-1000ppm, infrared NDIR detection principle, 1% high-precision, service life of 10 years, with local integrated sound and light alarm indication function.

Oxygen O2, range 0~25%, resolution 0.1%, intrinsic error ≤ +/- 1.5% F · S, response time ≤ 15s, recovery time ≤ 15s, alarm mode sound and light

SO2, range 0~10ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Using advanced infrared NDIR technology, Measurement range is 0-100ppm, with a variety of signal output (such as 4-20mA, RS485, switching, etc.), remote data monitoring, long life (2-3 years) Sensors.

NOX, range 0~100ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Conventional, thermal conductivity, leak measurement, accuracy is not high, susceptible to interference is not recommended, recommended MIC-600 long optical range infrared, range 0-10ppm, resolution up to 0.01ppm, high definition LCD display, support Chinese and English switching.

NH3, range 0~100ppm, resolution 0.1ppm, intrinsic error +/- 2%, response time T90 ≤ 120s, recovery time ≤ 120s, alarm mode sound and light

Formaldehyde CH2O, range 0~5ppm, resolution 0.01ppm, Sensors principle electrochemistry, intrinsic error +/- 10%

Pump suction type, range 0~100ppm, with USB power interface, can be charged anywhere, with dust design, with dust Filter.

Conventional, leak detection, optional PID, High Sensitivity Intelligent Sensors and low power consumption MCU chip, support a variety of signal output, equipped with high definition LCD screen, remote control without opening the lid operation and integrated sound and light alarm function.

CL2, range 0~10ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

H2, range 0~500ppm, resolution 0.1ppm, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%

Catalytic Sensors principle, detection of gas O2, diffusion sampling, two-stage concentration alarm, flameproof design is suitable for hazardous conditions 1 and 2, and the range is 0~30% vol.

Electrochemistry Sensors principle, detection of gas H2S, diffusion sampling, two-stage concentration alarm, flameproof design is suitable for dangerous conditions 1 and 2, and the range is 0~100ppm.

Electrochemistry principle, pump suction sampling, detection of ozone gas, range 0~1ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.