Gas detector

Halogen gas, SF-6, response time instantaneous, warm-up period < 6 seconds, continuous working time 5 hours, sensitivity to halogen refrigerant 3 gr/year, low power indication 3.3V +/- 0.2V, operating temperature 0~52 ℃, sensitivity adjustable

Electrochemical sensor principle, pump suction sampling, detection of hydrogen sulfide gas, range 0-50ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

Detect oxygen concentration, dust-proof design and water gas filtrate, equipped with dust Filter, built-in micro air pump, original imported high-precision Sensors, full software Automatic calibration, range 0-30% Vol.

Simultaneously detect H2S, NO2, O3, NH3 four gases, pump suction sampling, using imported electrochemistry gas Sensors, real-time detection, real-time storage, explosion-proof signs Ex ia ⅱ C T4 Ga.

Measurement range 0~50ppm, resolution 0.01ppm, detection accuracy ≤ +/- 3%.

Display error +/- 5% FS, response time ≤ 15 seconds, Sensors life of 2 years, measurement range 0-100% LEL, resolution 1% LEL, provide replaceable in-line module Sensors.

Simultaneously detect hydrogen sulfide and combustible gas, built-in 4000mA large-capacity polymer rechargeable battery, real-time detection and real-time storage, using 2.4-inch industrial-grade color screen.

Electrochemistry principle, pump suction sampling, detection of sulfur dioxide gas, range 0~10ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

Measurement range 0-1000PPM, resolution 1ppm, diffusion sampling, highly waterproof design, Sensors fault self-test, Automatic calibration function, two-stage triple alarm, replaceable in-line module Sensors.

Detect chlorine concentration, range 0-10PPM, using imported Sensors, 2.4-inch industrial-grade color screen, sound and light alarm, can set real-time detection, timing detection.

Detect NH3 gas concentration, range 100ppm, resolution 0.1ppm, diffusion sampling, highly waterproof design, Sensors fault self-test, Automatic calibration, two-stage triple alarm, replaceable in-line module Sensors.

Electrochemistry principle, pump suction sampling, detection of combustible gas, range 0~5ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

It can monitor the PM2.5 concentration in the air in real time (0~999μg/m ³) and provide intuitive data. The product has a sound and light alarm function, which automatically reminds when the air mass is not up to standard to ensure the health of the family.

Simultaneous detection of carbon monoxide, hydrogen sulfide, oxygen, built-in 4000mA large capacity polymer rechargeable battery, detection accuracy ≤ +/- 3%, Linearity ≤ +/- 1%, Sampling method pump suction.

Adjustable sensitivity to detect halogen gas leaks of less than 0.5 oz/year. Fast Response and warm-up period of less than 90 seconds ensure efficient detection. It is equipped with a 1200mAh lithium battery that provides 5 hours of continuous operation and supports charging function.

Detect H2S gas concentration, range 100ppm, resolution 0.1ppm, diffusion sampling, highly waterproof design, Sensors fault self-test, Automatic calibration, two-stage triple alarm, replaceable in-line module Sensors.

Detection gas CO, range 0~1000ppm, resolution 1ppm, intrinsic error +/- 5% or +/- 10PPM

Pump suction, semiconductor nano process, low power consumption, test tetrahydrothiophene THT gas, range 0-50mg/m3, with a variety of detection modes, with temperature compensation function.

Imported high accuracy Sensors, pump suction, while detecting combustible gas, oxygen, carbon monoxide, hydrogen sulfide four gases, explosion-proof circuit design.