Gas detector

Detection gas EX/O2/C0/H2S, +/- 5% FS (combustible )、 +/- 10% (carbon monoxide ）、 +/- 5μmol/mol (hydrogen sulfide), Light Emitting Diode, sound, vibration indication alarm

0~30% vol, resolution 0.1% vol, diffusion sampling, highly waterproof design, Sensors fault self-check, Automatic calibration function, two-stage triple alarm, replaceable in-line module Sensors.

N2, range 0~100%. Vol is only suitable for testing pure nitrogen on site, resolution 0.01% vol, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Thermal options, for detecting methane, oxygen, carbon monoxide, hydrogen sulfide four gases, support custom wireless signal transmission, dot matrix high definition LCDTFT LCD display, local integrated sound and light alarm indication, Protection level IP66.

Formaldehyde CH2O, range 0~10ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65.

HCL, range 0~10ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%, explosion-proof mark CNEx16.0547, Protection level IP65

Pump type, NO, range 0~50ppm, resolution 0.01ppm, Response time T90 ≤ 20s, Linearity ≤ +/- 1%, detection accuracy ≤ +/- 3%

Pump suction type, range 0~200ppm, with USB power interface, can be charged anywhere, with dust design, with dust Filter.

Catalytic Sensors principle, detection of gas CO, diffusion sampling, infrared remote control, two-stage concentration alarm, flameproof design is suitable for dangerous conditions 1 and 2, and the range is 0~1000ppm.

Simultaneously detect H2S, CO, O2, NO2 four gases, pump suction sampling, using imported electrochemistry gas Sensors, real-time detection, real-time storage, explosion-proof signs Ex ia ⅱ C T4 Ga.

Simultaneous detection of carbon monoxide, hydrogen sulfide, gas, built-in 4000mA large capacity polymer rechargeable battery, detection accuracy ≤ +/- 3%, Linearity ≤ +/- 1%, Sampling method pump suction.

For coal mines, the detection of gas (methane), carbon monoxide, oxygen, carbon dioxide four gases, explosion-proof certificate grade Ex db IIC T6 Gb, local integrated sound and light alarm indication, support for customized wireless signal transmission, and can be operated by remote control without opening the lid.

Electrochemical sensor principle, pump suction sampling, detection of hydrogen sulfide gas, range 0-50ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.

Detect oxygen concentration, dust-proof design and water gas filtrate, equipped with dust Filter, built-in micro air pump, original imported high-precision Sensors, full software Automatic calibration, range 0-30% Vol.

Simultaneously detect H2S, NO2, O3, NH3 four gases, pump suction sampling, using imported electrochemistry gas Sensors, real-time detection, real-time storage, explosion-proof signs Ex ia ⅱ C T4 Ga.

Measurement range 0~50ppm, resolution 0.01ppm, detection accuracy ≤ +/- 3%.

Display error +/- 5% FS, response time ≤ 15 seconds, Sensors life of 2 years, measurement range 0-100% LEL, resolution 1% LEL, provide replaceable in-line module Sensors.

Simultaneously detect hydrogen sulfide and combustible gas, built-in 4000mA large-capacity polymer rechargeable battery, real-time detection and real-time storage, using 2.4-inch industrial-grade color screen.

Electrochemistry principle, pump suction sampling, detection of sulfur dioxide gas, range 0~10ppm, through explosion-proof certification, with Filter, sound and light alarm, detection accuracy ≤ +/- 3%.