Gas detector

Conventional, optional PID, high concentration recommended differential UV analyzer, with low power design, equipped with MCU chip, support for a variety of signal output mode, rugged aluminum alloy housing, convenient remote monitoring and alarm.

Conventional, High Performance, High Sensitivity Intelligent Sensors and Low Power MCU chip design, support multiple signal output and wireless transmission, provide sound and light alarm and remote monitoring.

Leak measurement, accuracy requirements are not high occasions, MCU chip low-power modular design, support 4-20mA, RS485, switching and other signal output, remote monitoring requirements, high definition LCD screen supports Chinese and English switching.

Gas name and alias O3, detection range 0~100ppm, Working Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), storage temperature -10 ℃~ 30 ℃, detection accuracy is better than the national standard accuracy, generally ≤ +/- 3% FS

Conventional, high-performance, accurate Measurement range of 0-10ppm, resolution of 0.01ppm, intelligent Sensors and MCU chips, support wireless signal transmission.

Conventional, leak measurement, optional PID, using low-power MCU chip and intelligent Sensors technology, with explosion-proof aluminum alloy shell, support a variety of signal output methods (such as 4-20mA, RS485, switch, etc.), convenient remote monitoring and alarm.

Conventional, high-performance, low-power MCU chip modular design, intelligent Sensors technology, support for multiple signal outputs (such as 4-20mA, RS485, switching volume), remote data monitoring, explosion-proof certification and rugged aluminum alloy housing.

It can measure any 4 combinations of more than 600 kinds of gases, and has general and special customized models. It integrates photography, camera and lighting. It is easy to switch between pump suction and diffusion sampling. It supports wireless networking. It has a long battery life of 3500mA lithium battery. It is easy to operate in both Chinese and English. The protection reaches IP65 level

Detection range 0~100ppm, error of indication 3% SF, Repeatability 1%, Working Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), Storage temperature -10 ℃~ 30 ℃

Support 4 kinds of gas detection at the same time, there are general and customized special models, protection up to IP67 waterproof, 10 meters anti-drop, two-color mode anti-skid, Alarm mode is diverse, alarm value is adjustable. High definition color screen has no backlight visual, lithium battery charging fast, long battery life, support multi-mode software upgrade

High performance, online detection, MCU chip and intelligent Sensors technology, wireless transmission (such as LORA, 4G, WiFi, etc.), providing remote monitoring and data recording functions, LCDTFT high definition display.

High performance, flue gas online detection and analysis, only NO or NO2 is measured, and the sum of the measurements requires NO + NO2 + O2 conversion values (three Sensors), and supports wireless transmission (such as LORA, 4G, WiFi, etc.).

Detection gas type O3, detection range 0~100ppm, Working Temperature & Moisture -40 ℃~ 55 ℃, 10% -95% RH (no condensation), Storage temperature -10 ℃~ 30 ℃, error of indication 3% FS, Repeatability 1%

Gas name and alias O3, detection range 0~100ppm, error of indication ≤ national standard, Repeatability ≤ national standard, using mode diffusion type, use mode handheld, neck hanging type;, automatic zero calibration automatic correction function, storage temperature -10 ℃~ 30 ℃.

Gas name and alias O2, detection range 0-30% VOL, error of indication 3% FS, Repeatability 1%, Operating Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), storage temperature -10 ℃~ 30 ℃

Detection range 0~100ppm, error of indication 3% FS, Repeatability 1%, Working Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), Storage temperature -10 ℃~ 30 ℃

Detection range 0~10ppm, error of indication 3% FS, Repeatability 1%, error of indication 3% FS, Repeatability 1%, Operating Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), storage temperature -10 ℃~ 30 ℃

Detection gas type CH2O, detection range 0~10ppm, error of indication 3% FS, Repeatability 1%, Working Temperature & Moisture -40 ℃~ 55 ℃, 10% -95% RH (no condensation), storage temperature -10 ℃~ 30 ℃

Detection range 0~50ppm, error of indication 3% FS, Repeatability 1%, Operating Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), Storage temperature -10 ℃~ 30 ℃

Gas name and alias CL2, detection range 0~50ppm, Working Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), sound and light alarm storage temperature -10 ℃~ 30 ℃,

Gas name and alias CH2O, detection range 0~10ppm, Working Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation); Storage temperature -10 ℃~ 30 ℃, Working pressure 86-106KPA

Detection of gas type SO2, detection range 0~100ppm, error of indication 3% FS, Repeatability 1%, Working Temperature & Moisture -40 ℃~ 55 ℃, 10% -95% RH (no condensation), storage temperature -10 ℃~ 30 ℃

Gas name and alias O3, detection range 0~100ppm, sound and light alarm, Working Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), storage temperature -10 ℃~ 30 ℃, error of indication 3% FS

Detection range 0-30% VOL, error of indication 3% FS, Repeatability 1%, Operating Temperature & Moisture Operating temperature: -40 ℃~ 55 ℃; Operating humidity: 10% -95% RH (no condensation), Storage temperature -10 ℃~ 30 ℃