Mayer Rod

Molding process, rod diameter 12.7mm, suitable for experimental manual ultra-thin film, Spreader rod Total length 40cm, effective Spreader width 30cm.

The film thickness is 30 microns, the application width is 400mm, 0.5 μm high-precision film, and two types of Spreader rollers, L60 and L250, are also available.

Can film 150 micron thickness, does not have a handle Spreader, rod diameter of 10mm, can be manually Spreader by holding the space of 50mm at both ends.

22 μ m wet film thickness, diameter 10mm, Total length 400mm, using environmentally friendly plastic shell Encasement, material 304 stainless steel.

High-precision imported Mayer Rods, film 9μm, effective application width 300mm, is the original Japanese Grooved Rods, rod diameter is 10mm, can be used for film machine scraping.

25 micron film thickness, 250mm effective application width, high quality stainless steel, cold extrusion integrated, easy to clean, not easy to break wire.

0μm ultra-thin film, threadless smooth coating rod, the Total length is 400mm, the effective application width is 300mm, stainless steel material, good surface finish.

Manual Spreader, formed process, 15μm wet film thickness, 50 + 50mm handheld space at both ends, support Spreader range with width of 300mm.

Formed, 8μm wet film thickness, diameter 10mm, Total length 400mm, application width 300mm, hand width 50 + 50mm, material 304 stainless steel. Can be hand scraped or matched with film mechanism.

Formed Proofing rod, wet film thickness 10μm, stainless steel material, can be used for manual film or with Film Applicator automatic film, high-precision, especially suitable for inks to Colorimetric scraping sample Moulding.

The production process is formed, the wet film thickness is 20μm, the diameter is 10mm, the Total length is 400mm, the application width is 300mm, and the grip width is 50 + 50mm.

Film scraping, film thickness of 2μm, 400mm Total length, both ends of 50mm long grip part, effective application width of 30cm, suitable for ultra-thin film.

No. 5 Applicator rod is a formed Spreader process, which has the advantage of easy cleaning of continuous wire. Spreader wet film thickness is 5μm, and the effective application width is 300mm.

Formed Coating Applicator, cleaning simple continuous wire, film thickness of 18 microns, effective application width of 300mm, 50mm at both ends, no need for a handle.

Wet film thickness 200μm, application width 300mm, formed process, continuous wire easy to clean, wear-resistant anti-corrosion stainless steel material, suitable for Coating, coating, glue or Miscellaneous materials need a specific thickness of the film sample.

6 micron Coating thickness high-precision prepative, application width 300mm, widely used in pulp and paper, Spinning & weaving, Coating, Leather, Optical inspection film, Encasement materials and polymer materials and other precise quantitative preparatory film laminating experiments.

Hot-selling model, 3μm ultra-thin film, formed process design is not easy to break the wire and easy to clean, the effective application width is 300mm, and there are 50 + 50mm grip parts at both ends.

The lowest film thickness under OSP, can be prepared for 1.5 micron wet-film, suitable for users who need ultra-thin film, can be hand-scraped with Film Applicator, ultra-thin wet-film is recommended to pass Film Applicator to reduce manual pressure, shake and uniform speed problems caused by deviation.

Formed hand-coated wire rod, film thickness 100μm, diameter 10mm, application width 300mm, hand width 50 + 50mm, suitable for thick film scraping.

Formed Spreader process, with easy to clean the advantages of continuous wire, Film thickness of 18.3 microns, Spreader width of 30cm, suitable for manual film.

Hot-selling rod number, formed production process, wet film thickness 35μm, diameter 10mm, Total length 250mm, application width 250mm, grip width 0, material 304 stainless steel.

Wet film thickness 300μm, application width 300mm, formed process, continuous wire easy to clean, 304 stainless steel material, suitable for high film thickness experimental Moulding requirements, such as glue, Resin, paints, etc.

304 stainless steel material, Spreader wet film thickness 22.9μm, Spreader width 30cm, rod diameter 12.7mm, suitable for Coating, inks, pigments, glue and other films.

Film thickness is 27.4 μm, rod diameter 12.7mm, film width 30cm, suitable for slurry, silica gel, water-based ink, polymer materials and other films.