Mayer Rod

Using formed molding technology, the rod diameter is 6.35mm, the film can be 125.7μm, the Spreader width is 300mm, and it has the characteristics of continuous wire and easy cleaning.

Using formed molding technology, rod diameter is 6.35mm, can film 77.7μm, with continuous wire, easy to clean and other characteristics, Spreader width 300mm.

0.1 μm high accuracy quantitative coating film, coating, film thickness control is 112.0 microns, formed process cleaning is simple and not easy to block pigment.

Using formed molding technology, rod diameter is 6.35mm, can film 32.0 μm, with continuous wire, easy to clean and other characteristics, is imported from the United States.

Can film 160.0μm, using formed molding technology, high-grade wear-resistant stainless steel material, rod diameter of 6.35mm, with continuous wire, easy to clean and so on.

Big stick, Film thickness 194.3 μm, using 304 stainless steel material, the Total length is 400mm, support specification customization, suitable for scraping thicker film, formed easy to clean.

Extrusion process, 102.9μm, 1/4 inch diameter, stainless steel Applicator rod Total length 40cm, can be prepared 30cm film.

Using formed molding technology, the rod diameter is 6.35mm, which can film 54.9μm, and has the characteristics of continuous wire and easy cleaning.

Using formed molding technology, the rod diameter is 6.35mm, RDS 32 #can film 73.2μm, with continuous wire, easy to clean and other characteristics, hand width 50 + 50mm.

Popular RDS rod number, wet film thickness 13.7μm, production process formed, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Using formed molding technology, rod diameter is 6.35mm, can film 148.6μm, hand width 50 + 50mm, material stainless steel, with continuous wire, easy to clean and other characteristics.

Using formed molding technology, rod diameter is 6.35mm, can film 96.0μm, Spreader width 30mm, with continuous wire, easy to clean and so on.

Using extrusion molding technology, the rod diameter is 6.35mm, and the film can be 52.6 μm. It has the characteristics of continuous wire and easy cleaning.

Formed, wet film thickness 84.6μm, diameter 6.35mm, Total length 400mm, Spreader width 300mm, grip width 50 + 50mm, material stainless steel.

Formed molding technology, rod diameter 6.35mm, Film thickness 16.0μm, Spreader width 300mm, with continuous wire, easy to clean and other characteristics.

Using formed molding technology, the rod diameter is 6.35mm, and the film can be 53.3 μm, which has the characteristics of continuous wire and easy cleaning.

RDS imported, formed molding technology, rod diameter of 6.35mm, film 114.3 μm, with continuous wire, easy to clean and so on.

Extrusion type Mayer Rods, Film thickness of 107.4 μm, for film scraping of about 100 microns, Spreader rod at both ends of the hand portion of 50mm.

High-grade wear-resistant stainless steel material, formed molding technology, rod diameter of 6.35mm, can film 171.5μm, with continuous wire, easy to clean and other characteristics.

Production process is formed, wet film thickness 105.2μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

The production process is formed, the wet film thickness is 16.0μm, the diameter is 9.52mm, the Total length is 400mm, the Spreader width is 300mm, and the material is stainless steel.

Production process is formed, wet film thickness 41.1 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Production process is formed, wet film thickness 91.4 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Imported from the United States, the production process is formed, the wet film thickness is 36.6μm, the diameter is 9.52mm, the Total length is 400mm, the width of the Spreader is 300mm, and the material is stainless steel.