Casting Knife Flim Applicator

4-sided film thickness 15μm, 30μm, 60μm, 90μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Film thickness 50μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

4-sided film thickness 50μm, 100μm, 150μm, 200μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Application width 80mm, Total length 90mm, wet film thickness of 30μm, 60μm, 90μm, 120μm, 9Cr18Mo wear-resistant anti-corrosion stainless steel material, with factory test report, can be Measurement.

Application width 80mm, Total length 90mm, wet film thickness of 50μm, 100μm, 150μm, 200μm, 9Cr18Mo wear-resistant and anti-corrosion stainless steel material, with factory test report, can be Measurement

High Hardness stainless steel material, Hardness of 50~55HRC, accuracy control in +/- 2μm, smooth surface and support a variety of film thickness selection, can cooperate with Film Applicator to achieve automatic film scraping operation.

Film thickness 125μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

4-sided film thickness 100μm, 200μm, 300μm, 400μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

The thickness of the two films is 100μm and 150μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

Film thickness 200μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

The thickness of the two films is 150μm and 175μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

Film thickness 150μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Film thickness 75μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Two films thickness of 50μm, 75μm, using high carbon chromium wear-resistant stainless steel, application width 80mm, Total length 100mm, suitable for high viscosity samples Moulding.

4-sided film thickness 25μm, 50μm, 75μm, 100μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Film thickness 175μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

The thickness of the two films is 175μm and 200μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm.

The thickness of the two films is 75μm and 100μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

4-sided film thickness 1200μm, 1400μm, 1600μm, 1800μm, application width 80mm, with factory test certificate, using 9Cr18Mo wear-resistant stainless steel material, Measurement.

4-sided film thickness 100μm, 150μm, 200μm, 300μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Type 4-sided, wet film thickness 30/60/90/120μm, application width 80mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 100mm

Wet film thickness 0~5000um, application width 55mm, accuracy +/- 5um, differential head scale differential head, differential head Graduation 10um, type adjustable.

Type: 4-sided, wet film thickness: 5μm, 10μm, 15μm, 20μm, application width: 80mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 100mm.

Hardness stainless steel material, Hardness value 50~55HRC, film accuracy +/- 2μm, smooth surface and support custom specifications, three-coordinate inspection to ensure accuracy.