Casting Knife Flim Applicator

4-sided film thickness 15μm, 30μm, 60μm, 90μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

4-sided film thickness 50μm, 100μm, 150μm, 200μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Spreader, film thickness of 30μm, 60μm, 90μm, 120μm, stainless steel material, application width of 130mm.

Application width 80mm, Total length 90mm, wet film thickness of 30μm, 60μm, 90μm, 120μm, 9Cr18Mo wear-resistant anti-corrosion stainless steel material, with factory test report, can be Measurement.

High Hardness stainless steel material, Hardness of 50~55HRC, accuracy control in +/- 2μm, smooth surface and support a variety of film thickness selection, can cooperate with Film Applicator to achieve automatic film scraping operation.

4-sided film thickness 100μm, 200μm, 300μm, 400μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

The thickness of the two films is 300μm and 400μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

Film Film thickness 100μm and 150μm optional, accuracy of +/- 2μm, high hardness stainless steel material wear resistance corrosion resistance, smooth surface support a variety of shape customization, equipped with factory inspection report.

The thickness of the two films is 100μm and 150μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

The thickness of the two films is 150μm and 175μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

Two films thickness of 25μm, 50μm, using high carbon chromium wear-resistant stainless steel, application width 80mm, Total length 100mm, suitable for high viscosity samples Moulding.

Two films thickness of 50μm, 75μm, using high carbon chromium wear-resistant stainless steel, application width 80mm, Total length 100mm, suitable for high viscosity samples Moulding.

4-sided film thickness 150μm, 180μm, 210μm, 240μm, application width 130mm, with factory inspection certificate, can be measured, can be customized, using 9Cr18Mo wear-resistant stainless steel material.

The thickness of the two films is 200μm and 300μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

The thickness of the two films is 175μm and 200μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm.

The thickness of the two films is 75μm and 100μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

4-sided film thickness 100μm, 150μm, 200μm, 300μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

4-Sided, film thickness 25/50/75/100μm, Spreader width 78mm, stainless steel material.

Wet film thickness 100/200/300/400μm, Spreader width 80mm, size 80 * 100mm, used for Spreader film thickness wet-film.

Type: Combined quadrilateral fabricator, wet film thickness 30/60/90/120μm, Spreader width 160mm, material stainless steel.

4-Sided Applicator, wet film thickness of 25, 50, 75, 100μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.

Wet film thickness 300/400/500/600μm, application width not less than 60mm, accuracy 300 +/- 6μm; 400 +/- 8μm; 500 +/- 10μm; 600 +/- 12μm, size 80mm.

Wet film thickness 30/50/75/100μm, application width not less than 60mm, accuracy 30 +/- 2μm; 50 +/- 2μm; 75 +/- 2μm; 100 +/- 3μm, size 80mm.

Film thickness 125/150/200/250μm, stainless steel material, film accuracy accuracy 125 +/- 3μm; 150 +/- 4μm; 200 +/- 4μm; 250 +/- 5μm;, application width 60mm.