Casting Knife Flim Applicator

4-Sided type, Film thickness 5/10/15/20μm, Spreader width 160mm, hard stainless steel material.

Wet film thickness 200/250μm, application width 80mm, is a U-shaped design of double-sided Film Applicator, can be one-time scraping, is made of CR12 molybdenum vanadium material.

Type 4-sided, wet film thickness 150/200/250/300μm, application width 600mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 660mm

Wet film thickness 30/50/75/100μm, application width 80mm, stainless steel material, used for preparing films with uniform thickness, suitable for experimental use in industries such as Coating paints Gloss oil.

Wet film thickness 500/600μm, Spreader width 80mm, cr12 molybdenum vanadium material, size 100mm, is a U-shaped design of Film Applicator, film fast.

Wet film thickness 30~400μm, application width 80mm, stainless steel material, corrosion resistance, in line with GB/T 1727 standard.

4-Sided type, Film thickness 30/60/90/120μm, Spreader width 160mm, hard stainless steel material.

4-Sided type, Film thickness 10/15/20/25μm, Spreader width 80mm, hard stainless steel material.

Type 4-sided, wet film thickness 80/100/120/150μm, application width 250mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 280mm

Hardness stainless steel material, Hardness of 50~ 55HRC, accuracy +/- 2μm, support 50~ 1000μm multi-thickness film, smooth surface and three-coordinate detection to ensure accurate size.

Wet film thickness 125μm/150μm, application width 100mm, is a double-edged Film Applicator, dedicated to the Coating paints industry for specific wet film thickness preparatory.

Wet film thickness 75/100/125/150/200/250/300/400/500/600μm (optional), application width 80mm, size 100mm, double-sided type Coating Applicator.

High hardness stainless steel material, hardness of 50~ 55HRC, accuracy control in +/- 2 microns, good Abrasion Resistance and corrosion resistance, support a variety of Spreader widths and custom specifications.

Accuracy up to +/- 2 microns, using high hardness stainless steel hardness 50~ 55HRC, with 100mm Spreader width and 450/500/550/700μm wet film thickness optional, strong corrosion resistance.

4-Sided structure design, application width 500mm, accuracy +/- 2μm, high Hardness stainless steel material, corrosion resistance and wear resistance, support non-standard customization and automatic film matching.

High Hardness stainless steel material, Hardness of 50~ 55HRC, accuracy control in +/- 2 microns, smooth surface and support non-standard custom specifications, can be used with Automatic Film Applicator.