Casting Knife Flim Applicator

4-sided film thickness 15μm, 30μm, 60μm, 90μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Film thickness 100μm, application width 75mm, accuracy +/- 2um, with factory test report (imported coordinate detection), can stand Measurement, 9Cr18Mo stainless steel material.

Wet film thickness 75μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Wet film thickness 100μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

Two films thickness of 50μm, 75μm, using high carbon chromium wear-resistant stainless steel, application width 80mm, Total length 100mm, suitable for high viscosity samples Moulding.

4-sided film thickness 25μm, 50μm, 75μm, 100μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

The thickness of the two films is 75μm and 100μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

4-Sided, film thickness 25/50/75/100μm, Spreader width 78mm, stainless steel material.

Single-sided Bird-type, Film thickness 100μm, Spreader width 78mm, accuracy +/- 3μm, 9Cr18Mo high carbon chromium stainless steel material.

The film thickness is 25, 50, 75, 100 μm, the Application width is 160mm, and it is made of wear-resistant and corrosion-resistant alloy steel.

4-Sided Applicator, wet film thickness of 25, 50, 75, 100μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.

Wet film thickness 30/50/75/100μm, application width not less than 60mm, accuracy 30 +/- 2μm; 50 +/- 2μm; 75 +/- 2μm; 100 +/- 3μm, size 80mm.

Single-sided ISO Bird-type, wet film thickness 100μm, Spreader width 100mm, accuracy +/- 3μm, material stainless steel, ISO standard.

Single-sided GB Bird-type, wet film thickness 75μm, Spreader width 78mm, accuracy +/- 3μm, material 9Cr18Mo high carbon chromium stainless steel, GB standard.

Single-sided ISO Bird-type, wet film thickness 75μm, Spreader width 100mm, accuracy +/- 3μm, material stainless steel, ISO standard.

Large frame type 4-sided Applicator, wet film thickness 25/50/75/100μm, Spreader width 90mm, material stainless steel, size 90 * 120mm

Wet film thickness 25/50/75/100μm, Spreader width 160mm, for a predetermined film thickness wet-film Spreader, to determine the hiding power of the sample.

Type: Combined quadrilateral fabricator, wet film thickness 30/60/90/120μm, Spreader width 160mm, material: stainless steel.

4-Sided Applicator, wet film thickness of 20, 40, 60, 80μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.

Wear-resistant and corrosion-resistant alloy steel, Film thickness 25/50/75/100μm, Spreader width 90mm.

The thickness of the two films is 75μm and 100μm, using high-grade stainless steel wear-resistant material, the application width is 105mm, and the Total length is 125mm.

4-Sided frame; 30μm, 60μm, 90μm, 120μm; suitable for low viscosity water, acidic, alkaline products, can be used with coaters.

4-Sided type, Film thickness 25/50/75/100μm, Spreader width 80mm, stainless steel material.

Type: Combined quadrilateral Applicator, wet film thickness 25/50/75/100μm, application width 160mm, material stainless steel.