Casting Knife Flim Applicator

High Hardness stainless steel material, Hardness of 50~55HRC, accuracy control in +/- 2μm, smooth surface and support a variety of film thickness selection, can cooperate with Film Applicator to achieve automatic film scraping operation.

4-sided film thickness 100μm, 200μm, 300μm, 400μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

The thickness of the two films is 300μm and 400μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

The thickness of the two films is 200μm and 300μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

Wet film thickness 100/200/300/400μm, Spreader width 80mm, size 80 * 100mm, used for Spreader film thickness wet-film.

Wet film thickness 300/400/500/600μm, application width not less than 60mm, accuracy 300 +/- 6μm; 400 +/- 8μm; 500 +/- 10μm; 600 +/- 12μm, size 80mm.

Wet film thickness 400μm, Spreader width 78mm, accuracy +/- 10μm, material stainless steel, standard GB standard, single-sided GB Bird-type.

Wet film thickness 300μm, Spreader width 100mm, accuracy +/- 6μm, stainless steel material, in line with ISO standards, suitable for Paints, Coating and other industries to do film proofing.

Single-sided ISO Bird-type, wet film thickness 400μm, Spreader width 100mm, accuracy +/- 10μm, material stainless steel, standard ISO standard

Wet film thickness 500μm, Spreader width 100mm, accuracy +/- 10μm, with high hardness and abrasion resistance, high temperature, low temperature dimensional stability.

Wet film thickness 350μm, Spreader width 78mm, accuracy +/- 5μm, is a precision single-sided I-shaped Film Applicator.

Wet film thickness 350μm, Spreader width 100mm, accuracy +/- 6μm, is a stainless steel single-sided Coating Applicator, suitable for Coating, inks, Paints and other industries.

Wet film thickness 500μm, Spreader width 78mm, accuracy +/- 10μm, stainless steel material, is an I-shaped Film Applicator for film proofing.

Wet film thickness 100/200/300/400μm, Spreader width 90mm, material: stainless steel, not easy to rust, longer service life, suitable for Coating inks industry film.

4-Sided, Film thickness 100/200/300/400μm, material stainless steel.

Spreader width 78mm, material stainless steel, size 78 * 100mm, type 4-sided 100μm, 150μm, 200μm, 300μm

Type: Combined quadrilateral Applicator, wet film thickness 100/150/200/300μm, Spreader width 160mm, material: stainless steel.

The film thickness is 100, 200, 300, 400 μm, the Application width is 160mm, and it is made of wear-resistant and corrosion-resistant alloy steel.

4-Sided Applicator, wet film thickness of 100, 200, 300, 400 μm, Application width of 80mm, using high-quality wear-resistant corrosion-resistant alloy steel.

4-sided film thickness 175μm, 200μm, 250μm, 300μm, application width 80mm, with factory inspection certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

4-Sided Spreader, Film thickness 100μm, 150μm, 250μm, 300μm, Spreader width 80mm, hard stainless steel material.

4-Sided type, Film thickness 100/200/300/400μm, Spreader width 80mm, hard stainless steel material.

Application width 80mm, stainless steel corrosion resistance, can be prepared wet film thickness of 150/200/300/400μm.