Casting Knife Flim Applicator

Wet film thickness 125μm, application width 50mm, film accuracy +/- 2um, with factory inspection report (imported three coordinate detection), can stand Measurement.

The thickness of the two films is 75μm and 100μm, using high carbon chromium wear-resistant stainless steel, the application width is 80mm, and the Total length is 100mm, which is suitable for Moulding of high viscosity samples.

4-sided film thickness 1200μm, 1400μm, 1600μm, 1800μm, application width 80mm, with factory test certificate, using 9Cr18Mo wear-resistant stainless steel material, Measurement.

4-sided film thickness 100μm, 150μm, 200μm, 300μm, application width 80mm, with factory test certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Wet film thickness 25μm, Spreader width 78mm, accuracy +/- 2μm, 9Cr18Mo high carbon chromium stainless steel material, with high hardness, corrosion resistance advantages.

Wet film thickness 50μm, Spreader width 78mm, accuracy +/- 2μm, using high carbon chromium stainless steel, in line with GB standards.

Wet film thickness 25μm, Spreader width 100mm, accuracy +/- 2μm, suitable for Coating, paints, inks and other industries Preparative specific Film thickness film.

Adjustable Film Applicator, 3500 μ m large range, 10 μ m sub-scale, can be prepared for different film thickness coatings, stainless steel material, wear and corrosion resistance, easy to carry.

The thickness of the two films is 150μm and 200μm, and it is made of high-grade wear-resistant stainless steel, with an effective application width of 100mm and a Total length of 120mm.

4-Sided frame; 30μm, 60μm, 90μm, 120μm; suitable for low viscosity water, acidic, alkaline products, can be used with coaters.

Film thickness 250μm, application width 160mm, accuracy +/- 2um, with factory test report (imported three coordinate detection), can withstand Measurement, 9Cr18Mo stainless steel material.

Type 4-sided, wet film thickness 50μm, 75μm, 125μm, 200μm, application width 100mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 110mm.

Type 4-sided, wet film thickness 30/60/90/120μm, application width 80mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 100mm

Type: 4-sided, wet film thickness: 5μm, 10μm, 15μm, 20μm, application width: 80mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 100mm.

Type 4-sided, application width 100mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 110mm.

Type 4-sided, wet film thickness 200/400/600/800μm, application width 100mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 130mm.

Film thickness 75μm, application width 75mm, accuracy +/- 2um, with factory test report (imported three coordinate detection), can withstand Measurement, 9Cr18Mo stainless steel material.

4-sided film thickness 400μm, 600μm, 800μm, 1000μm, application width 80mm, with factory inspection certificate, can be measured, using 9Cr18Mo wear-resistant stainless steel material.

Type 4-sided, wet film thickness 10/15/20/25μm, application width 80mm, accuracy +/- 2μm, material 9Cr18Mo stainless steel, Total length 100mm

Film thickness 2250μm, application width 75mm, accuracy +/- 2um, with factory test report (imported three coordinate detection), can withstand Measurement, 9Cr18Mo stainless steel material.

Accuracy up to +/- 2 microns, using high hardness stainless steel hardness 50~ 55HRC, with 100mm Spreader width and 450/500/550/700μm wet film thickness optional, strong corrosion resistance.

High hardness stainless steel material, hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface wear and corrosion resistance, support customization of different Dimensions.