Vacuumpump

Adopt low noise design and precision machining, equipped with special gas ballast valve to prevent pump oil from mixing water, pumping speed 2L/S, ultimate pressure ≤ 6x10-1Pa, small size and light weight.

Pumping speed 1L/S, intake diameter 20mm, automatic double anti-return oil safety device, with special design gas ballast valve to prevent pump oil from mixing.

The pumping speed is 4L/S, the noise is only 64dBA, the special gas ballast valve design is used to prevent the pump oil from mixing, and the automatic double anti-return oil device is equipped, which is small in size and light in weight.

Using flameproof, burning seal, intrinsically safe composite explosion-proof technology treatment, safe and reliable, pumping volume 2L/S, ultimate pressure ≤ 6x10-1Pa, suitable for flammable and explosive environment.

The pumping speed is 8L/S, the ultimate pressure is 0.005mbar, and it is equipped with a gas ballast valve to prevent the pump oil from mixing with water. It can operate continuously without returning oil, and is suitable for a variety of interfaces.

The oil pump is forced into the oil, equipped with an automatic anti-return oil check valve, and the pumping speed is 25L/S.

Pumping speed up to 15L/S, Ultimate Vacuum ≤ 5x10 ^ -1Pa, equipped with gas ballast valve to prevent pump oil mixing, can be equipped with a variety of interfaces to adapt to different equipment needs.

"380V, 2 (7.2) L/S (m3/h, partial pressure: ≤ 4 * 10- ², full pressure: ≤ 1, 1400r/min, φ 30mm outer diameter, KF-25, 1L, (B series, no oil return, without switch)

Direct rotary vane type, oil pump forced into the oil, with automatic anti-return oil check valve, pumping speed 8L/S.

380V, 15 (54) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400 (1700) r/min, φ 40mm

380V, 8 (28.8) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400 (1700) r/min, φ 40mm

380V, 25 (90) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400 (1700) r/min, φ 50mm

Adopting explosion-proof composite explosion-proof technology, it is safe and reliable; the pumping speed is 60m3/h, and the ultimate pressure is as low as 0.005mbar. It is equipped with anti-suction valve and gas ballast valve to adapt to different Operating Conditions.

380V, 4 (14.4) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400r/min, φ 30mm outer diameter, KF-25, 1.2L

Pumping speed 4L/S, intake diameter 30mm, automatic double anti-return oil safety device, with special design gas ballast valve to prevent pump oil from mixing.

Adopting integral pump structure and forced oil pump lubrication Control system, the pumping rate is 50Hz up to 90m ³/h, the ultimate pressure is as low as 0.005mbar, the noise is only 58dBA, and the parts are few and easy to maintain.

It is treated with flameproof composite technology, safe and reliable, with a pumping rate of 4L/S and a noise as low as 63dBA. It is equipped with a gas ballast valve to remove a small amount of water vapor.

Using flameproof composite technology treatment, safe and reliable, pumping rate 8L/S, limit pressure ≤ 5x10-1Pa, noise as low as 66dBA, small size and light weight.

The pumping speed is 25L/S, the ultimate pressure is 0.005mbar, and it is equipped with a gas ballast valve to prevent the pump oil from mixing with water. It is equipped with an automatic anti-return oil check valve, which can be adapted to a variety of interfaces.

The pumping speed is 4L/S, the ultimate pressure is 0.006mbar, and the oil pump is used to force the oil inlet device, which can still operate continuously under low air pressure. It is equipped with a gas ballast valve to prevent the pump oil from mixing with water.

Explosion-proof composite technology, Explosion-proof level ExdIBT4, pumping speed 36m ³/h, with anti-suction valve and gas ballast valve, to adapt to different vacuum requirements.

The pumping speed is 6L/S, the ultimate pressure is ≤ 6x10-1Pa, and it is equipped with a gas ballast valve to prevent the pump oil from mixing with water. It can be adapted to a variety of interfaces to meet the needs of different Operating Conditions.

Adopt flameproof composite technology, safe and reliable, equipped with anti-suction valve and gas ballast valve, pumping speed 90m ³/h, ultimate pressure ≤ 5x10 ^ Pa, suitable for flammable and explosive environment.