Vacuumpump

Adopting low-noise design and precision machining, the noise is only 63dBA; it is equipped with a special gas ballast valve to prevent the pump oil from mixing and prolong the service life; the pumping speed is up to 2L/S, and the ultimate pressure is as low as 6x10-1Pa.

Adopt low noise design and precision machining, equipped with special gas ballast valve to prevent pump oil from mixing water, pumping speed 2L/S, ultimate pressure ≤ 6x10-1Pa, small size and light weight.

With low noise design and precision machining, the noise is only 62dBA; equipped with special gas ballast valve to prevent pump oil from mixing and prolong service life. Pumping speed 0.5L/S, ultimate pressure ≤ 6x10-1Pa.

Adopting low-noise design and precision machining, the noise is only 62dBA; equipped with a special gas ballast valve to prevent the pump oil from mixing and prolong the service life; equipped with an automatic double anti-return oil device.

Extraction speed: 30L/min, > 0.085 (150mbar), positive pressure: 40Psi, series: 1, motor power 180, size mm: 250 * 135 * 210, 8kg, < 50dB, function: positive and negative pressure dual-use type

Pumping speed 1L/S, intake diameter 20mm, automatic double anti-return oil safety device, with special design gas ballast valve to prevent pump oil from mixing.

Extraction speed: 30L/min, > 0.085 (150mbar), series: 1, motor power 160, size mm: 250 * 135 * 210, 7.5kg, < 50dB, function: negative pressure

Using imported corrosion-resistant rubber diaphragm, the noise is less than 50dBA, can work continuously for 24 hours, with positive and negative pressure dual-use function, pumping speed up to 30L/min.

Adopting flameproof composite technology, safe and reliable, with anti-suction valve and gas ballast valve, pumping speed 4m ³/h, limit pressure 0.005mbar, suitable for flammable and explosive environment.

Using flameproof, burning seal, intrinsically safe composite explosion-proof technology treatment, safe and reliable, pumping volume 2L/S, ultimate pressure ≤ 6x10-1Pa, suitable for flammable and explosive environment.

Integral pump structure and forced oil pump lubrication system, pumping rate 8m ³/h, Ultimate Vacuum ≤ 5x10-1Pa, equipped with special gas ballast valve and built-in air inlet check valve, noise as low as 58dBA.

Equipped with gas ballast valve to prevent pump oil from mixing water, pumping speed 4L/S, Ultimate Vacuum ≤ 6x10-1Pa, can be adapted to a variety of interfaces, suitable for pumping gases containing steam, particles and so on.

The pumping speed is 8L/S, the ultimate pressure is 0.005mbar, and it is equipped with a gas ballast valve to prevent the pump oil from mixing with water. It can operate continuously without returning oil, and is suitable for a variety of interfaces.

Two-stage pump, 6-8mbar, 20L/min, interface 10mm, pump sheet material: PTFE, composite diaphragm material: HNBR + PTFE (non-standard products can be customized), < 55db, with vacuum regulating valve, with solid discharge valve, 1450rpm

220V, 4 (14.4) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400r/min, φ 30mm outer diameter, KF-25, 1.2L

220V, 2 (7.2) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 30/12/14/16mm outer diameter, KF-25, 0.8L

Pumping speed up to 15L/S, Ultimate Vacuum ≤ 5x10 ^ -1Pa, equipped with gas ballast valve to prevent pump oil mixing, can be equipped with a variety of interfaces to adapt to different equipment needs.

380V, 25 (90) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400r/min, φ 50mm outer diameter, KF-50, 5L

"380V, 2 (7.2) L/S (m3/h, partial pressure: ≤ 4 * 10- ², full pressure: ≤ 1, 1400r/min, φ 30mm outer diameter, KF-25, 1L, (B series, no oil return, without switch)

220V, 1 (3.6) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 20mm outer diameter, KF-16, 0.7L

Direct rotary vane type, oil pump forced into the oil, with automatic anti-return oil check valve, pumping speed 8L/S.

180W, 80L/min, head 10m, Vacuum Level: -0.098 (2Kpa), air extraction volume: 10L/min, number of air extraction heads 2, safety function, check valve, casing: plastic, water tank volume: 15L, water tank: PP, 11Kg, ◆ inner stainless steel: SHB-ⅲ A: jet, air extraction nozzle: 304 stainless steel material (with 2 rubbertubing, length 94cm short: 34cm)

380V, 15 (54) L/S (m3/h), partial pressure: ≤ 4 * 10- ², total pressure: ≤ 1, 1400 (1700) r/min, φ 40mm

180W, 80L/min, head 10m, vacuum degree: -0.098 (2Kpa), air extraction volume: 10L/min, number of air extraction heads 2, safety function, check valve, case: plastic, Water Tank volume: 15L, Water Tank: PP, 11Kg, ◆ Inner stainless steel: SHB-III A: jet, air extraction nozzle: 304 stainless steel (with 2 rubbertubing, length 94cm short: 34cm)