Vacuumpump

Adopting low-noise design and precision machining, the noise is only 63dBA; it is equipped with a special gas ballast valve to prevent the pump oil from mixing and prolong the service life; the pumping speed is up to 2L/S, and the ultimate pressure is as low as 6x10-1Pa.

Adopt low noise design and precision machining, equipped with special gas ballast valve to prevent pump oil from mixing water, pumping speed 2L/S, ultimate pressure ≤ 6x10-1Pa, small size and light weight.

With low noise design and precision machining, the noise is only 62dBA; equipped with special gas ballast valve to prevent pump oil from mixing and prolong service life. Pumping speed 0.5L/S, ultimate pressure ≤ 6x10-1Pa.

Adopting low-noise design and precision machining, the noise is only 62dBA; equipped with a special gas ballast valve to prevent the pump oil from mixing and prolong the service life; equipped with an automatic double anti-return oil device.

The pumping speed is 4L/S, the noise is only 64dBA, the special gas ballast valve design is used to prevent the pump oil from mixing, and the automatic double anti-return oil device is equipped, which is small in size and light in weight.

Adopting flameproof composite technology, safe and reliable, with anti-suction valve and gas ballast valve, pumping speed 4m ³/h, limit pressure 0.005mbar, suitable for flammable and explosive environment.

Using flameproof, burning seal, intrinsically safe composite explosion-proof technology treatment, safe and reliable, pumping volume 2L/S, ultimate pressure ≤ 6x10-1Pa, suitable for flammable and explosive environment.

Integral pump structure and forced oil pump lubrication system, pumping rate 8m ³/h, Ultimate Vacuum ≤ 5x10-1Pa, equipped with special gas ballast valve and built-in air inlet check valve, noise as low as 58dBA.

The pumping speed is 8L/S, the ultimate pressure is 0.005mbar, and it is equipped with a gas ballast valve to prevent the pump oil from mixing with water. It can operate continuously without returning oil, and is suitable for a variety of interfaces.

220V, 2 (7.2) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 30/12/14/16mm outer diameter, KF-25, 0.8L

Pumping speed up to 15L/S, Ultimate Vacuum ≤ 5x10 ^ -1Pa, equipped with gas ballast valve to prevent pump oil mixing, can be equipped with a variety of interfaces to adapt to different equipment needs.

"380V, 2 (7.2) L/S (m3/h, partial pressure: ≤ 4 * 10- ², full pressure: ≤ 1, 1400r/min, φ 30mm outer diameter, KF-25, 1L, (B series, no oil return, without switch)

220V, 4 (14.4) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 30mm outer diameter, KF-25, 1L

380V, 2 (7.2) L/S (m3/h), partial pressure: ≤ 6 * 10- ², total pressure: ≤ 1.33, 1400r/min, φ 30/12/14/16mm outer diameter, KF-25, 0.8L

Adopting explosion-proof composite explosion-proof technology, it is safe and reliable; the pumping speed is 60m3/h, and the ultimate pressure is as low as 0.005mbar. It is equipped with anti-suction valve and gas ballast valve to adapt to different Operating Conditions.

Adopting low-noise design and precision machining, the noise is only 64dBA; equipped with a special gas ballast valve to prevent pump oil from mixing and prolong service life; pumping speed is 4L/S, limit pressure is 0.006mbar, suitable for a variety of vacuum operations.

Adopt integral pump structure and forced oil pump lubrication system, pumping rate up to 4m ³/h, Ultimate Vacuum 0.005mbar, operating noise is only 58dBA, equipped with special gas ballast valve and built-in check valve.

Adopting integral pump structure and forced oil pump lubrication system, the pumping rate reaches 60m ³/h, Ultimate Vacuum ≤ 5x10-1Pa, special gas ballast valve design can accelerate the extraction of steam without polluting oil quality.

Adopting integral pump structure and forced oil pump lubrication Control system, the pumping rate is 50Hz up to 90m ³/h, the ultimate pressure is as low as 0.005mbar, the noise is only 58dBA, and the parts are few and easy to maintain.

Pumping speed 6L/S, ultimate pressure ≤ 6x10-1Pa, equipped with gas ballast valve to prevent pump oil from mixing, can be connected to a variety of interfaces and adapted to a variety of auxiliary equipment.

The pumping speed is 25L/S, the ultimate pressure is 0.005mbar, and it is equipped with a gas ballast valve to prevent the pump oil from mixing with water. It is equipped with an automatic anti-return oil check valve, which can be adapted to a variety of interfaces.

The pumping speed is 2L/S, the ultimate pressure is less than or equal to 6x10-1Pa, and the oil pump is used to force the oil inlet device, which can operate continuously.

The pumping speed is 2L/S, the ultimate pressure is less than or equal to 6x10-1Pa, an oil pump forced oil inlet device is adopted, and a gas ballast valve is equipped to prevent the pump oil from mixing with water, which can operate continuously.

The pumping speed is 4L/S, the ultimate pressure is 0.006mbar, and the oil pump is used to force the oil inlet device, which can still operate continuously under low air pressure. It is equipped with a gas ballast valve to prevent the pump oil from mixing with water.