Color difference meter

Measurement diameter is 8mm, Repeatability ≤ 0.07Delta E, only D65 a Measurement light source; automatic black and white board correction when turned on; light positioning function fast positioning; one charge can be measured more than 3000 times.

45 °/0 ° Illumination/Measurement conditions, measurement distance is 7.5mm +/- 3mm, suitable for laboratory measurement and online measurement Reflection spectrum and chroma data, 20ms high speed measurement, Automatic calibration, φ 7mm measurement diameter, Measurement.

Economical type, 4mm small diameter, dual positioning function of positioning block and cross, can be measured more than 5000 times with a full charge.

CRX-51 is a non-contact Colorimeter, built-in black and white calibrated, measurement distance of 0.5mm, 20ms high-speed measurement, full-band balanced LED Light source, over Measurement.

Compact and portable, Full Light spectrum LED + UV lamp, 8mm measurement diameter, accuracy 0.01, measurement port with Optical inspection protection sheet, 34 kinds of Color space, can quickly identify the color number, support APP Bluetooth connection, Automatic calibration, with Type-C interface.

With liquid, powder multi-functional test accessories, 16mm measurement caliber, with Color simulation function, with eight Color difference formula, repeability accuracy < 0.03, built-in whiteboard automatic correction, a variety of Light sources and Color space.

On-line color measurement, automatic white calibrating, 15 °, 45 °, 110 ° three observation angles, measurement φ 7mm diameter, providing reflectance measurement analysis software, Light source lifetime quality assurance.

4Mm/8mm/40mm three-caliber, can measure small objects, patterns, rough surfaces; Delta E < 0.06; USB, RS232 interface; A, D65, F2 three Light sources; 100 sets of storage capacity.

Equipped with multi-functional test components, can test powder, slurry, liquid color difference, measurement diameter is 8mm, Repeatability ≤ 0.07Delta E, only D65 a Measurement light source; automatic black and white board correction; light positioning function fast positioning.

With a large measurement diameter of 20mm, the sampling light spot is larger, and a larger area of material can be measured at one time; Repeatability Delta E * ab ≤ 0.03, in line with the national first-class standard; equipped with a 3.5-inch color Touchscreen, easy to operate, support a variety of Color difference formula and Color space.

4mm/8mm dual diameter, built-in large-capacity lithium battery, ΔE * ab ≤ 0.06, with USB interface, flat, curved and small-area items can be measured.

14mm large measurement diameter, for texture, meat, rough surface measurement, 8/d Optical inspection geometry, with USB interface, ΔE * ab ≤ 0.08.

45 °/0 ° Optical inspection geometry, suitable for Encasement, printing industry, built-in multiple electronic Formula Guide, can mass store Color data, with QC detection function, can customize tolerance value.

CM-200S is a 10mm measurement diameter, 9 Data storage, Measurement range L *: 5~ 100.

Color simulation function, with eight Color difference formula, 8mm universal diameter measurement, repeability accuracy < 0.03, built-in whiteboard automatic correction, a variety of Light sources and Color space.

The measurement diameter is 4mm; automatic black and white correction when turned on; dual measurement end faces can be switched; automatic black and white board correction when turned on; configuration of CQCS3 high-end host computer software; new integrating sphere optical path design to eliminate the influence of stray light;

With 8mm and 4mm dual caliber, Repeatability accuracy × E * ab < 0.03; Built-in whiteboard parameters, while configuring physical whiteboard; light + cross double positioning; new integrating ball design, more stable measurement; with CQCS3 high-end quality management software.

Color simulation function, with eight Color difference formula, 18mm large diameter measurement, repeability accuracy < 0.03, built-in whiteboard automatic correction, a variety of Light sources and Color space.

IWAVE basic model, 0.5 seconds to speed up the detection speed, 1.60 million Light source, Color bias intuitive judgment, ready to use, easy to carry.

Measurement diameter is 20mm large diameter, using D65 Light source; Designed with 45 °/0 ° Optical inspection geometry, suitable for color difference measurement of textured substances on the surface; optional micro printer, powder test box.

16Mm large diameter, suitable for detecting texture, rough, soft, wet and other products, built-in whiteboard automatic correction, repeability accuracy < 0.05, with computer software.

4Mm small diameter, suitable for testing small pieces, curved surface and other products, built-in whiteboard automatic correction, repeability accuracy < 0.05, with computer software.

8Mm/4mm dual aperture; camera viewing and positioning function, there are D65 and D50A two Light sources to choose from; automatic whiteboard calibration when turned on; extended diameter measurement concave part; configuration rechargeable high-capacity lithium-ion battery; optional powder test box/multi-functional test assembly measurement liquid powder.

Provide accurate and stable measurement performance (Delta E fluctuation is less than 0.08), unique lighting positioning function and powerful PC-side extension Software supports color difference analysis, chroma index calculation and color sample library management.