Friction coefficient meter

By measuring the smoothness of the material, the material production mass process index can be controlled and adjusted to meet the product use requirements. In addition, it can also be used for the measurement of the smoothness performance of cosmetics, eye drops and other daily chemical products.

Measurement range 0~ 1, accuracy +/- 0.001N, force measurement 0~ 10N, slider 200 +/- 2g, support a variety of standards, can measure the Coefficient of Friction, microcomputer control, degaussing design.

Color large screen touch LCD screen, resolution 0.01N, can be automatically reset, overload protection, the instrument has a standard wan interface, can display test results, average value, standard deviation.

Measurement accuracy 0.001N, no mechanical knob, full digitalization system, PVC control panel and LCD, equipped with micro printer, Organic Glass countertop.

Simultaneous detection of dynamic and static coefficient of friction, microcomputer control, built-in micro printer, slider size 63x63mm, table size 130x440mm, accuracy level 1.

Range 0-30N, Measurement accuracy 0.001N, Test Travel 0-320mm, Test speed 0-1200mm/min, Automatic calculation of static Kinetic COF, can measure 180 ° Peel Strength, support a variety of standard and non-standard tests

Test station three, test load 50~1000g, test stroke 10~60mm (manually adjustable), Test speed 5~ 60 times/min, Test Platform size 400 * 180 (mm), adjustable speed and stroke functions, LCD display intuitive and convenient.

Angle range 0~ 85 °, accuracy 0.01 °, angular velocity 0.1 °/s~ 10.0 °/s, slider mass 1300g, angular velocity continuously variable, platform automatic reset, degaussing, microcomputer control, with micro printer, to meet ASTM D202 and other standards.

Force range 0.01~ 10N, resolution 0.01N, Indication Error +/- 2%, Slider Travel 170mm, speed 0~ 360mm/min adjustable, Touchscreen display, stepper motor control, automatic reset overload protection, RS232 communication.

According to GB17200 standard design, Measurement accuracy +/- 1%, slider traverse speed 100mm/min, suitable for Plastic film and sheet Coefficient of Friction Determination, easy to operate.

Force range 0-10N, resolution 0.001N, slider 200 +/- 2g, speed 100mm/min, in line with GB/T10006 and other standards, LCD Linear dispersion analysis, standard weight Paper cutter

Force range 0~ 5N, accuracy level 0.5, resolution 0.001N, slider mass 200g, Travel 70mm or 150mm, speed 100 or 150mm/min, Determination of Dynamic and Static Coefficient of Friction, five inch LCD display, micro printer.

Test accuracy is less than ± 2%, can automatically measure the sample dynamic and static coefficient of friction, configure the micro printer printing results.

Test accuracy less than ± 2%, can automatically measure the dynamic and static coefficients of friction at the same time, and configure the micro printer to directly output the results.

Range 0-5N, Measurement accuracy 0.001N, Slider Travel 70-320mm, Speed 0-1200mm/min, Fully automated test, Support multi-national standards and Peel Strength test, Linear dispersion real-time display of force value, degaussing processing.

0-10N range, accuracy 0.001N, slider Travel 70-320mm, speed 0-1200mm/min, microcomputer automatic control, static Kinetic COF same test, standard RS232 interface, support GB ISO ASTM and other standards

Test accuracy is less than ± 2%, can automatically measure the dynamic and static coefficients of friction at the same time, and configure the micro printer to directly output the test results.

Force range 0~ 5N, accuracy 0.001N, slider mass 200g, speed 100mm/min, suitable for Plastic film, paper, rubber and other materials, multi-power design, microcomputer control, while measuring Kinetic COF.

Angular range 0~ 45 °, measurement Graduation 2.0 ′, test rod weight 270g +/- 5g, test rod finish 0.20-0 μm, test rod material Shore Hardness HD59 +/- 2

Three stations, load 50~ 1000g, Travel 10~ 60mm, speed 30~ 110 times/min, count 0~ 999900 times, anti-corrosion box, power-off memory, LCD display, multi-media test, with multiple sets of weights and fixtures.