Sampler

Pneumatic, capable of sampling 10mm, sampling error +/- 0.35cm2.

Blade movement straight line and baffle verticality +/- 0.10mm, cutting sample size tolerance +/- 0.5mm, simple structure and high Precision, easy to maintain.

It is suitable for paper quantitative determination and sampling of standard samples of thin-slice burst resistance experiment, in line with QB/T 1671-98 standard. Using simple pressure bar operation, the sampling area is 100cm ², and the error is controlled at +/- 0.35cm ², which is suitable for the thickness range of 0.1~ 1.2mm.

The sample area is 125cm ², and the sample accuracy is +/- 0.35. It is a sampling instrument for quantitative determination required for production and scientific research. It is designed according to the QB/T1671 national industry standard.

Used to detect the water-absorption energy of paper and Cardboard surface, that is, the water resistance performance of paper and Cardboard. Sampling size φ 125mm, sampling size error +/- 0.2mm, sampling thickness range 0.1~ 1.5mm

Test ring compressive strength need to use the sample plate, execution standard GB/T 2679.8, GB/T 6546, GB/T 6548, GB/T 2679.6

In accordance with GB/T 2679.8 standards, it is suitable for compressive strength Testers. The equipment consists of a specimen holder and thirteen different sizes of center discs, which can adapt to different thicknesses of paper and Cardboard specimens to ensure high-precision testing.

Sampling area 100mm ², sampling Film thickness (0.1~ 1.2) mm, for paper, Cardboard gram weight measurement.

Side press with Sampler, test paper ring compressive strength Sampler. It is a special sampling device required for Cardboard ring compressive strength test (RCT) and corrugated core paper flat compressive strength test (CMT).

Using Taiwan SDI brand blades and Japanese SK4 high carbon steel, the sampling size error is only +/- 0.5mm, the thickness range is ≤ 10mm, and the design is novel to remove redundant parts.

Sampling area 100cm2, error +/- 0.35cm2, suitable for 0-10mm thickness of paper samples, fiber materials and sheet materials, easy and accurate operation.

The combination of imported sliding rails and Japanese imported blades ensures accurate cutting parallelism and easy cutting operation. The scale is laser engraved, which is wear-resistant and easy to clean. The strong magnet design is convenient for blade installation, ensuring safe and reliable cutting.

Sampling size 152 * 12.7mm, parallelism of two long sides ≤ 0.015mm, sampling thickness range 0.05~ 1.2mm

The stamping sampling structure is simple and firm, the knife edge is quenched and the sampling is labor-saving and accurate, and the sampling size is 125mm +/- 0.2mm with small error.

The stamped sampling design is equipped with a special 18 steel knife edge, the sample diameter is 112.8mm, and the sampling area is 100cm ², which is suitable for accurate sampling of 0.1-1 mm thickness of various materials.

The special No. 10 steel knife edge is durable, the punching sample is smooth without burrs, the integrated casting structure is sturdy and not deformed, and the sampling area is 100cm ² with an error of +/- 0.25cm.

100Cm ² standard sampling area, stamping sampling method, sampling thickness range 0.1~ 1.0mm, suitable for paper Cardboard gram weight detection.

The sampling size is 70 * 38mm, and the parallelism of the two long sides is less than or equal to 0.015mm. It is suitable for the thickness range of 0.1 to 1.2mm. It is a reliable auxiliary tool for stiffness testing.

Separation unit length corrugated fibreboard gluing line required fixture, pin diameter φ 3mm (A/C corrugated) and φ 2mm (B corrugated), suitable for different corrugated type test, in line with national standards.

Thrust sampling design, can cut 25mmx100mm edge pressure sample and 25mmx80mm gluing sample, sampling thickness range of 18mm, the error is only +/- 0.5mm.