Coating Thickness Gauge

Magnetic Induction and eddy Current paints thickness measurement, with F and N split external probes, thickness measurement range 0~1250μm, error accuracy +/- 3%, LCD screen, with memory calibrated value, automatic identification of different substrates.

Automotive coatings, built-in probe, double thickness measurement principle; RS232 interface; automatic memory calibrating and identification of substrates; hand-held part of the groove design; can be purchased separately USB and Bluetooth data output.

Magnetic Induction eddy Current dual function platings thickness measurement, thickness measurement range 0~1250μm, error range +/- 3%, single or continuous measurement, measurement of copper, aluminum, zinc, tin and other substrate enamel, rubber, paints, plastic layer and other film thickness.

Built-in probe, dual function thickness measurement; Single and continuous two measurement modes; Automatic memory calibrating and identification substrate; RS232C interface; USB and Bluetooth data output can be purchased separately.

1250μm integrated probe, dual thickness measurement principle; RS232 interface; automatic memory calibrating and identification of substrates; with statistical function, single and continuous Measurement mode; hand-held part groove design; USB and Bluetooth data output can be purchased separately.

Two thickness measurement methods, magnetic and eddy current, can be used to measure the thickness of the nonmagnetic coating layer on the magnetic metal substrate and the thickness of the nonconductive coating layer on the nonmagnetic metal substrate.

Coating Thickness Gauge host, support zero adjustment and multi-point calibrating, with temperature compensation function, with data statistics function, need to buy another probe, can be matched with rack test.

Measurement principle magnetic Induction + eddy Current, measurement range 0~1250μm, error range +/- 1~ 3% n or +/- 2.5μm, minimum measurement surface 6mm.

Measurement range 0.0-3500 μm, Measurement accuracy ≤ +/- ( 3% H + 2 μm), the use of hard wear-resistant ruby probe to reduce measurement errors, digital signal processing is completed directly on the probe to ensure data stability throughout the measurement process.

Measurement accuracy up to 2% H + 1μm, support continuous measurement function, 0.1 second fast data acquisition, built-in memory chip can save 9 sets of data, minimum matrix thickness Fe: 0.2mm/NFe: 0.05mm.

It can measure the thickness in a low temperature environment at minus 40 ℃, the thickness measurement range is 0.0-2000 μm, the built-in integrated dual-function probe has an error range of +/- 3%, and has the function of temperature compensation and digitalization of analog signal terminals.

Magnetic Induction/eddy Current working principle, range 0~1500 μm, with three Measurement modes including high-precision measurement, with five statistics, support zero and one point calibrated.

Magnetic Induction/eddy Current Thickness Measurement range 0~1250μm, thickness measurement accuracy +/- 3%, support single and continuous measurement.

Measurement range 0~1500μm, can switch display galvanized gram weight unit, magnetic Induction + eddy Current, Measurement range 0~1500μm, Measurement accuracy +/- 2% H + 1μm.

With switching display galvanized gram weight and thickness, magnetic Induction + eddy Current, Measurement range 0~1500μm, Measurement accuracy +/- 2% H + 1μm, can quickly, no damage, precision coating, platings thickness measurement.

Measurement accuracy of +/- 1~ 3% n or +/- 2.5 µm or 0.1 mil, iron-based and non-iron-based dual-use Coating Thickness Gauge, Single and Continuous Measurement modes available.

Magnetic Induction + eddy Current, Measurement range 0~1500μm, Measurement accuracy +/- 2% H + 1μm, spring guide sleeve probe with wear-resistant cemented carbide probe, can measure 1-5μm ultra-thin coatings.

0~1250 µm, Measurement accuracy +/- 1~ 3% n, Suitable for measurement of Coating thickness of ferrous and non-ferrous materials, Single and Continuous Measurement modes, Automatic recollection of calibrated values, metric-to-metric unit conversion, manual and automatic shutdown functions.

Standard test range: 0~1250µm/0~50mil (Miscellaneous Measurement range can be customized), resolution: 0.1 µm (below 100 µm); 1 µm (above 100 µm); 0.1mil, Measurement accuracy ： +/- 1~ 3% n or +/- 2.5 µm or 0.1mil, thinnest substrate: 0.3mm/12mil, minimum convex diameter: 26mm/1.02inch, minimum concave radius: 50mm/1.97inch.

Measuring method F magnetic Induction & NF eddy current, Measurement range 0~2000μm (Miscellaneous Measurement range can be customized), resolution 0.1μm /1 μm, Precision +/- 1~ 3% n or +/- 2.5μm, minimum surface F: convex 1.5mm/concave 25mm; N: convex 3mm/concave 50mm, minimum measurement area 6mm.

Measuring method F magnetic Induction & NF eddy current, Measurement range 0~2000μm (Miscellaneous Measurement range can be customized), resolution 0.1μm /1 μm, Precision +/- 1~ 3% n or +/- 2.5μm, minimum curved surface F: convex 1.5mm/concave 25mm; N: convex 3mm/concave 50mm, minimum measurement area 6mm, thinnest substrate 0.3mm.