Coating Thickness Gauge

Magnetic Induction, eddy current integration, automatic identification substrate, super wear-resistant cemented carbide probe, measuring thickness of 1500 μm, Measurement accuracy +/- 2% + 1 μm, reaction speed up to 0.3 seconds/time, with temperature compensation.

Magnetic induction, eddy current integration, automatic identification of the substrate, super wear-resistant cemented carbide probe, measuring thickness up to 1500μm, measurement accuracy ± 2% + 1μm, reaction speed up to 0.3 seconds/time, with temperature compensation.

Range 1500 μm, magnetic induction principle, split probe, measurement accuracy ± 2%, super wear-resistant cemented carbide probe, measurement speed up to 0.3 seconds/time.

Reaction time 0.5s; Aluminum dual function; OverMeasurement; Integrated probe; Range 0-2000um; Error range ± (3% + 2um of reading); Minimum matrix Film thickness Fe0.2mm/NFe0.05mm.

Magnetic and eddy current integration, automatic identification substrate, super wear-resistant cemented carbide probe, measuring thickness up to 3000μm, measurement accuracy ± 2% + 1μm, reaction speed up to 0.3 seconds/time, with temperature compensation.

Magnetic, eddy current integration, automatic identification substrate, super wear-resistant cemented carbide probe, measuring thickness of 3000 μm, Measurement accuracy +/- 2% + 1 μm, reaction speed up to 0.3 seconds/time, with temperature compensation.

Iron-based Coating Thickness Gauge, thickness 0~1250 microns, error of +/- 3%, magnetic thickness measurement principle, in line with GB/T and JJG standards, with single point and two points Calibration method.

Magnetic induction principle, super wear-resistant cemented carbide probe, measuring thickness up to 3000μm, measurement accuracy ± 2% + 1μm, reaction speed up to 0.3 seconds/time, with temperature compensation.

Magnetic induction thickness measurement principle, super wear-resistant cemented carbide probe, thickness measurement up to 1500μm, measurement accuracy ± 2% + 1μm, reaction speed up to 0.3 seconds/time, with temperature compensation, can measure 1-5μm ultra-thin coating.

It can measure the thickness in a low temperature environment at minus 40 ℃, the thickness measurement range is 0.0-2000 μm, the built-in integrated dual-function probe has an error range of +/- 3%, and has the function of temperature compensation and digitalization of analog signal terminals.

Magnetic and eddy Current dual-function Thickness Gauge, thickness range 0~1250μm, error +/- 3%, integrated structure, in line with a variety of GB/T and JB/T standards, Appearance Compact and portable.

Measurement range 0~1500μm, can switch display galvanized gram weight unit, magnetic Induction + eddy Current, Measurement range 0~1500μm, Measurement accuracy +/- 2% H + 1μm.

Measurement angle 90 °, using magnetic Induction Measurement principle, suitable for measurement edge coatings, narrow tube coatings or small surface area coatings, especially for some small workpiece thickness measurement.

Measurement principle: magnetic Induction, Measurement range 0~1250μm, adaptable model leeb242, equipped with a printer, can print out the measurement data.