Brand：
Specs：
Test substrate
Measured film thickness
Cutter Type
Applicable standard
Miscellaneous
Country
Standard
$326.00
SE
TQC SP3000 Adhesion Tester Cross-cut Guide Gauge/Baige Plate 6-in-1 Multifunctional Adhesion Tester
6 teeth/11 teeth1mm、1.5mm、2mm、3mm
6 teeth/11 teeth, knife tooth spacing 1mm, 1.5mm, 2mm, 3mm, instrument material stainless steel, application standard ISO 2409:2003, ASTM D3359
$346.00
SE
TQC SP1703 cross-cut cutter head 6 teeth, spacing 2mm for CC2000/CC3000 series
6 teeth2mm< 60 µm (soft substrate) > 61 to 120 µm
$346.00
SE
TQC SP1704 cross-cut cutter head 6 teeth, spacing 3mm for CC2000/CC3000 series
6 teeth3mm121~250µm
$363.00
SE
TQC SP1705 cross-cut cutter head 11 teeth, spacing 1mm Suitable for CC2000/CC3000 series
11 teeth1mm0~50µm
Number of teeth 11, tooth spacing 1mm; Coating thickness within 50μm; ASTM 3359 standard.
$346.00
SE
TQC SP1702 cross-cut cutter head 6 teeth, pitch 1mm for CC2000/CC3000 series
6 teeth1mm0 to 60 µm (solid substrate)
6 teeth, 1mm cutter teeth; high-grade wear-resistant stainless steel material; meets ISO/DIN2409 standards.
$335.00
SE
TQC SP3200 dust test kit for evaluating the size and size of surface dust
The size and size of surface dust can be evaluated according to ISO 8502-3, and the test suite is consistent with the advantages of BS EN ISO 8502-3, both during passing tests and during the permanent recording of dust presence.
$361.00
SE
TQC SP1706 cross-cut cutter head 11 teeth, spacing 1.5mm for CC2000/CC3000 series
11 teeth1.5mm121~250µm
If you don't know how to choose "Cross-Cut Tester", please consult customer service.