Miscellaneous Sclerometer

Hardness measurement 63~ 105HRF brass, handheld design, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, through anodic oxidation treatment, high toughness surface glass.

Suitable for soft aluminum or aluminum alloy; Maximum Hardness value can be recorded; Measured at one pressure, in line with ASTM B648, HD2583, GB/T3854 standards.

Resolution 0.1Hba; in line with ASTM B648, ASTM HD2583, GB/T3854 standards; equilibrate positioning device, Hardness value digital display device, removable Hardness value calibrating device; can measure Pap/Brinell/Vickers/Wechsler/Rockwell various Hardness values.

Hardness range of 25~ 110HRE aluminum alloy, handheld design, workpiece size thickness 0.4-8 mm, inner diameter > 6mm, range 0~20HW, through anodic oxidation treatment, high toughness surface glass.

Test aluminum alloy, workpiece size thickness 0.4~ 13mm, inner diameter > 10mm, Hardness range 25~ 110HRE, anodic oxidation treatment, high toughness table glass, Measurement.

Test aluminum alloy, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, in line with Chinese non-ferrous standard YS/T420-2000 and American standard ASTM B647-84.

Hardness range 50~92HRB, test stainless steel strip cold-rolled thin steel strip, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, range 0~20HW, accuracy 0.5HW, in line with national standards, can be Measurement.

Designed for the aluminum processing and FRP industry, Hardness measurement from pure aluminum to hard aluminum alloys. Measurement range 0~100HBa, no support required, suitable for oversized or very thick workpieces, supports the measurement of various Hardness values, and has MAX Maximum hold and average calculation functions for easy operation.

Applicable material aluminum alloy, Hardness range 25~ 110HRE, sample size thickness 0.6-8 inner diameter > 6mm, range 0~20HW, accuracy 0.5HW.

Measurement range 0HBa~ 100HBa, equivalent to 25HBa~ 135HBW, resolution 0.1HBa, error of indication 81HBa~ 88HBa +/- 1HBa, Repeatability Error 81HBa~ 88HBa +/- 1.5HBa, average calculation function √, brinell hardness measurement √, Vickers Hardness measurement √, Webster Hardness measurement √, rockwell hardness measurement √,

Pressure needle 26 ° frustum cone, anodic oxidation treatment, calibrated at any time, can be operated with one hand, resolution 0.5HBa, measurable thickness as low as 1mm, range 0~100HBa, standard two spare pressure needles.

Range 0~20HW, accuracy 0.5HW, weight 625g, size 220 * 160 * 30mm, battery 2 * 1.5AAA.

Designed for grain feed pellets. The durometer offers significant advantages such as high-precision, easy operation and portability. It offers four different measurement units: N (Newton), kg (kg), lb (lb), g (gram), which can be switched and converted to each other as needed.

Range 0~20HW, accuracy 0.5HW, sample size thickness 0.6-8 mm inner diameter > 6mm, for rapid detection of aluminum alloy profiles, pipes, plates, aluminum workpieces and Miscellaneous soft metal Hardness.

Range 0~20HW, accuracy 0.5HW, weight 625g, size 220 * 160 * 30mm, battery 2 * 1.5AAA.

Indenter spherical 2.5mm φ, convertible probe Probe curved end for bobbin diameter less than or equal to 400mm

Measurement range 0~100HBa, equivalent to 25~ 150HBW, resolution 0.1HBa, error of indication 81~ 88HBa +/- 1HBa, Repeatability Error 81~ 88HBa +/- 1.5HBa, additional measurement Brinell/Vickers/Wechsler/rockwell hardness value.

Applicable material aluminum alloy, Hardness range 25~ 110HRE, sample size thickness 0.6-13 inner diameter > 10mm, range 0~20HW, accuracy 0.5HW.

Range 0~20HW, accuracy 0.5HW, sample size thickness 0.6-6 mm inner diameter > 10mm, for rapid detection of aluminum alloy profiles, pipes, plates, aluminum workpieces and Miscellaneous soft metal Hardness.

Applicable material aluminum alloy, Hardness range 25~ 110HRE, sample size thickness 0.6-6 inner diameter > 10mm, range 0~20HW, accuracy 0.5HW.

Range 0~20HW, accuracy 0.5HW, sample size thickness 0.6-13 mm inner diameter > 10mm, for rapid detection of aluminum alloy profiles, pipes, plates, aluminum workpieces and Miscellaneous soft metal Hardness.

Indenter spherical 5mm φ, convertible probe Probe curved end for bobbin diameter less than or equal to 400mm

Equipped with LCD display, it supports four test modes: real-time, peak, automatic timing and average value. The force holding time of the test process can be set, and the test data can be exported to Excel format, and the storage quantity is unlimited.