Miscellaneous Sclerometer

Accuracy ≤ +/- 1HD, display parameter Hardness value/average value/MAX Maximum, Measurement unit HD, Display range 0HD~ 100 HD, Measurement range 10HD~ 90 HD, resolution 0.1HD, low Voltage prompt √, automatic shutdown function √, working Environmental temperature: 0 ℃~ 50 ℃, Humidity: 80% RH.

Measurement range 0KG~ 100KG (0N-1000N), measurement depth 0cm~ 30cm, all kinds of backfill soil, clay, sand and mixed soil after rolling of the measured material, Test accuracy ≤ 0.25%.

Pressure needle 26 ° frustum cone, anodic oxidation treatment, calibrated at any time, can be operated with one hand, resolution 0.5HBa, measurable thickness as low as 1mm, range 0~100HBa, standard two spare pressure needles.

Stress testing spring material: spring steel, test head material: tungsten carbide, test head diameter 0.5mm (Opel, optional); 0.75mm (Bosch, standard); 1.0mm (optional) (in line with IS01518 and DEF), spring pressure range 0~3N (blue mark); 0~10N (red mark); 0~20N (yellow mark); 0~40N (white mark), (optional).

Test brass, Hardness range 63~ 105HRF, workpiece size thickness 0.4-8 mm, inner diameter > 6mm, through anodic oxidation treatment, high toughness surface glass, clear scale.

Compression stroke 2.50mm, load 237g, pressurized load 90g, indenter shape and size ball R2.50, Measurement unit HA, suitable for surface hardness testing of fine sand molds/cores with manual or mechanical low and medium pressure molding.

Range 0~20HW, accuracy 0.5HW, weight 625g, size 220 * 160 * 30mm, battery 2 * 1.5AAA.

Display range 0HD~ 100HD, test range 10HD~ 90HD, resolution 0.1HD, Measurement accuracy ≤ +/- 1HD, power supply 2 AA batteries, operating conditions temperature 0 ℃~ 50 ℃, Humidity < 80%.

Measurement range +/- 50 kgf; +/- 490 N; +/- 110 Lbf, resolution 0.01 kgf; 0.1 N; 0.1 Lbf, Precision class 0.5, accuracy +/- 0.5% FS (range) +/- 1 digital peak, unit Kgf, N, Lbf, Measured value peak, instantaneous value.

Compression stroke 2.50mm, load 1500g, pressurized load 180g, indenter shape and size ball R1.20, Measurement unit HC, suitable for high Voltage molding of sand surface hardness testing.

Designed for grain feed pellets. The durometer offers significant advantages such as high-precision, easy operation and portability. It offers four different measurement units: N (Newton), kg (kg), lb (lb), g (gram), which can be switched and converted to each other as needed.

Range 0~20HW, accuracy 0.5HW, sample size thickness 0.6-8 mm inner diameter > 6mm, for rapid detection of aluminum alloy profiles, pipes, plates, aluminum workpieces and Miscellaneous soft metal Hardness.

Range 0~20HW, accuracy 0.5HW, weight 625g, size 220 * 160 * 30mm, battery 2 * 1.5AAA.

High-precision Hardness measurement for flat and curved surfaces. Its durable tungsten carbide test head and a wide selection of pressure ranges ensure reliable testing on a wide range of materials.

Measurement range 0~100HBa, equivalent to 25~ 150HBW, resolution 0.1HBa, error of indication 81~ 88HBa +/- 1HBa, Repeatability Error 81~ 88HBa +/- 1.5HBa, with MAX Maximum hold function.

Resolution 0.1HWA, measurement accuracy +/- 0.5HWA, repeability 0.5HWA, film thickness 0.6mm-8mm, inner diameter of tested material > 10mm, display 128 * 64 point array OLED, operation temperature range -10~50 ℃, 0~85% RH (no condensation)

Measurement range 0~100HBa, equivalent to 25~ 150HBW, resolution 0.1HBa, error of indication 81~ 88HBa +/- 1HBa, Repeatability Error 81~ 88HBa +/- 1.5HBa, additional measurement Brinell/Vickers/Wechsler/rockwell hardness value.

Applicable material aluminum alloy, Hardness range 25~ 110HRE, sample size thickness 0.6-13 inner diameter > 10mm, range 0~20HW, accuracy 0.5HW.

Range 0~20HW, accuracy 0.5HW, sample size thickness 0.6-6 mm inner diameter > 10mm, for rapid detection of aluminum alloy profiles, pipes, plates, aluminum workpieces and Miscellaneous soft metal Hardness.

Indenter spherical 10mm φ, convertible probe The curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm

Range 0~20HW, accuracy 0.5HW, sample size thickness 0.6-13 mm inner diameter > 10mm, for rapid detection of aluminum alloy profiles, pipes, plates, aluminum workpieces and Miscellaneous soft metal Hardness.

Indenter spherical 5mm φ, convertible probe Probe curved end for bobbin diameter less than or equal to 400mm

Suitable for medium Hardness material measurement, needle end pressure 0-44.45 N, needle stroke range 0-2.5 mm, can be used with fixed load test bench.

Suitable for medium hard resilience, rubber or microporous materials, Measurement range 0-100HE, error of indication ≤ +/- 1 HE, needle stroke 0-2.5 mm, can be used with handheld or matching test bench.