Miscellaneous Sclerometer

Hardness measurement 63~ 105HRF brass, handheld design, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, through anodic oxidation treatment, high toughness surface glass.

Suitable for soft aluminum or aluminum alloy; Maximum Hardness value can be recorded; Measured at one pressure, in line with ASTM B648, HD2583, GB/T3854 standards.

Resolution 0.1Hba; in line with ASTM B648, ASTM HD2583, GB/T3854 standards; equilibrate positioning device, Hardness value digital display device, removable Hardness value calibrating device; can measure Pap/Brinell/Vickers/Wechsler/Rockwell various Hardness values.

Hardness range of 25~ 110HRE aluminum alloy, handheld design, workpiece size thickness 0.4-8 mm, inner diameter > 6mm, range 0~20HW, through anodic oxidation treatment, high toughness surface glass.

Test aluminum alloy, workpiece size thickness 0.4~ 13mm, inner diameter > 10mm, Hardness range 25~ 110HRE, anodic oxidation treatment, high toughness table glass, Measurement.

Test aluminum alloy, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, in line with Chinese non-ferrous standard YS/T420-2000 and American standard ASTM B647-84.

Hardness range 50~92HRB, test stainless steel strip cold-rolled thin steel strip, workpiece size thickness 0.4-6 mm, inner diameter > 10mm, range 0~20HW, accuracy 0.5HW, in line with national standards, can be Measurement.

Designed for the aluminum processing and FRP industry, Hardness measurement from pure aluminum to hard aluminum alloys. Measurement range 0~100HBa, no support required, suitable for oversized or very thick workpieces, supports the measurement of various Hardness values, and has MAX Maximum hold and average calculation functions for easy operation.

Measurement range 0HBa~ 100HBa, equivalent to 25HBa~ 135HBW, resolution 0.1HBa, error of indication 81HBa~ 88HBa +/- 1HBa, Repeatability Error 81HBa~ 88HBa +/- 1.5HBa, average calculation function √, brinell hardness measurement √, Vickers Hardness measurement √, Webster Hardness measurement √, rockwell hardness measurement √,

Pressure needle 26 ° frustum cone, anodic oxidation treatment, calibrated at any time, can be operated with one hand, resolution 0.5HBa, measurable thickness as low as 1mm, range 0~100HBa, standard two spare pressure needles.

Test brass, Hardness range 63~ 105HRF, workpiece size thickness 0.4-8 mm, inner diameter > 6mm, through anodic oxidation treatment, high toughness surface glass, clear scale.

Designed for grain feed pellets. The durometer offers significant advantages such as high-precision, easy operation and portability. It offers four different measurement units: N (Newton), kg (kg), lb (lb), g (gram), which can be switched and converted to each other as needed.

Applicable material aluminum alloy, Hardness range 25~ 110HRE, sample size thickness 0.6-8 inner diameter > 6mm, range 0~20HW, accuracy 0.5HW.

Range 0~20HW, accuracy 0.5HW, sample size thickness 0.6-8 mm inner diameter > 6mm, for rapid detection of aluminum alloy profiles, pipes, plates, aluminum workpieces and Miscellaneous soft metal Hardness.

Range 0~20HW, accuracy 0.5HW, weight 625g, size 220 * 160 * 30mm, battery 2 * 1.5AAA.

Applicable material aluminum alloy, Hardness range 25~ 110HRE, sample size thickness 0.6-13 inner diameter > 10mm, range 0~20HW, accuracy 0.5HW.

Measurement range 0~100HBa, equivalent to 25~ 150HBW, resolution 0.1HBa, error of indication 81~ 88HBa +/- 1HBa, Repeatability Error 81~ 88HBa +/- 1.5HBa, additional measurement Brinell/Vickers/Wechsler/rockwell hardness value.

Indenter spherical 2.5mm φ, convertible probe Probe curved end for bobbin diameter less than or equal to 400mm

Indenter spherical 10mm φ, convertible probe The curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm

Applicable material aluminum alloy, Hardness range 25~ 110HRE, sample size thickness 0.6-6 inner diameter > 10mm, range 0~20HW, accuracy 0.5HW.

Range 0~20HW, accuracy 0.5HW, sample size thickness 0.6-13 mm inner diameter > 10mm, for rapid detection of aluminum alloy profiles, pipes, plates, aluminum workpieces and Miscellaneous soft metal Hardness.

Indenter spherical 5mm φ, convertible probe Probe curved end for bobbin diameter less than or equal to 400mm

Measurement modes of real-time, peak, automatic timing and average value, force holding time can be set, Measurement range 0-100HB, resolution 0.1HB, support data export and Linear dispersion display.