Abrasion Tester

Segmental adjustable Rotation speed Frequency, free adjustment of friction distance 10-50mm, equipped with a variety of weights to meet different testing needs, suitable for a variety of material surface wear performance testing.

Support 10-200mm travel range and 10-200mm/s speed adjustment, equipped with tungsten carbide scraper head and a variety of pressurized weights, suitable for plastic, paints, soft metal and other material detection.

Coating for testing wear resistance performance, can also be used to test the wear resistance of the substrate performance, Friction Frequency 60 +/- 1cpm, test stroke 90mm, dry abrasion instrument, no need to add chilling down liquid.

Electronic display 6 digits, automatic shutdown, load 250g, 500g, 750g, suitable for leather, fabric, Coating, paper, floor tiles, plywood, Glass, natural rubber and other wear resistance tests.

9 stations, counting range 0-999999 times, transverse travel 60.5 +/- 0.5mm, longitudinal travel 24 +/- 0.5mm, in line with ISO, ASTM D, GB/T, EN ISO standards.

Two stations, adjustable stroke range of 6-150mm, PLC programming control, touch screen operation, can set speed, reciprocating motion and other parameters to meet a variety of standard requirements.

8 stations, counting range 0-999999 times, transverse travel 60.5 +/- 0.5mm, longitudinal travel 24 +/- 0.5mm, in line with ISO, ASTM D, GB/T, EN ISO standards.

4 stations, counting range 0-999999 times, transverse travel 60.5 +/- 0.5mm, longitudinal travel 24 +/- 0.5mm, in line with ISO, ASTM D, GB/T, EN ISO standards.

Test load 80~1000 (g), table maximum load 5Kg, moving range 2~ 50mm or can be agreed according to customer needs, Test speed 5~ 60rpm/min, speed input mode knob, load code 10, 20, 50, 100, 200, 500 (g), machine size W530 * H490 * D410 (mm), machine weight 50Kg., using power supply AC220V; 50HZ.

Suitable for testing the wear resistance of various coatings, such as floor paint, route board paint, etc. It can also be used to test the wear resistance of Spinning & weaving products, paper, plastic, decorative boards, etc.

Abrasion stroke 40 mm (20 mm), abrasion speed 0.32 m/sec, tilt angle 3 °, specimen diameter φ 16 mm, thickness 6~ 15 mm, test load 5N, 10N, fixture lateral displacement 4.2 mm/roller per turn, machine size 70 * 30 * 30cm, weight 65kg, Power supply Voltage 1 0006, AC220V, 3 A.

Color 7-inch touch screen, webbing test width 108mm, with a hexagonal rod, in line with ASTM D6770, GB14166-2013 standards, for testing webbing, automotive seat belts.

It is suitable for the measurement of the wear resistance performance of hydraulic hoses with fabric or steel wire reinforcement layers. The number of test groups can reach three groups, and the number of cycles can be set up to 999999 times to meet the needs of various specifications.

In line with EN425 and other international standards, the foot wheel can be automatically lifted and equipped with infrared protection devices, the test table and the foot wheel share the motor to ensure the same Rotation speed, the height of the vacuum device is automatically adjusted.

CHINA 500g weight is NBC-500g rubber alcohol Wear testing machine Optional .