Film Imapct Tester

Impact height 50cm, in line with GB/T1732-93 standard, weight 1000 +/- 1g.

Test plastic, ceramic, acrylic, fiberglass and other materials, drop height 0-1500mm adjustable, in line with JIS-K6745, A5430 test standards.

Test plastics, ceramics, acrylic, fiberglass and other materials, drop height 0-2000mm adjustable, in line with JIS-K6745, A5430 test standards.

Maximum test plate thickness 45mm, < unk > 15.9mm, < unk > 12.7mm standard Impact head, in line with ISO, ASTM standards, test coating impact resistance and flexibility

It is used to test the performance of Dry-Film of Paints, varnish or related products against cracking or disbonding from the substrate when deformed by heavy hammer impact under standard conditions. Impact height 0~100cm, drop weight mass 1000g, additional mass 1kg/2Lbs, Striker Diameter φ 15.9mm, φ 20mm, die base aperture φ 16.3mm, φ 27mm.

The impact speed is 3.5m/s, the strike center distance is 322mm, and the pendulum lift angle is 160 °. It adopts a high-precision swirl/spin encoder to automatically correct the energy loss caused by friction and wind resistance.

Impact height 0~100cm, sub-scale 1cm, drop weight mass 1000g, Striker Diameter φ 8mm, Impact depth 2mm, die base aperture φ 15mm, designed according to GB1732-79 standard, using heavy objects to fall from a height Impact film, to determine the impact strength of the film.

Impact height 100cm, in line with GB/T1732-93 standard, weight 1000 +/- 1g.

Impact height 120cm, Impact height 120cm, sub-scale 1cm, drop weight mass 1000g, Striker Diameter φ 8mm, Impact depth 2mm, die base aperture φ 15mm, curvature radius R2.5-3mm, meet the standard GB/T 1732

Impact height 0-100cm (0-40inch), Impact height Graduation 1cm, for testing Paints, varnishes or related products of dry coatings against cracking or flaking ability from the substrate.

Impact height 1250mm, Impact height 0~100cm, drop weight mass 300g, 1000g, Striker Diameter φ 15.9mm, φ 12.7mm, meet the standards ASTM D2794, ASTM D3029, ASTM D4226, HG chemical industry standards.

Impact height 120cm, Impact height 120cm, sub-scale 1cm, drop weight mass 2000g, Striker Diameter φ 16mm, Impact depth 2.5mm, die base aperture φ 16.3mm, radius of curvature R2.5-3mm, meet the standard ASTM D 2794-92.

Impact height 120cm, Impact height 120cm, sub-scale 1cm, drop weight mass 1000g, Striker Diameter φ 16mm, Impact depth 2.5mm, die base aperture φ 15mm, curvature radius R2.5-3mm, meet the standard GB/T 5237.4-2000.

Impact height 0~100cm, Impact height 0~100cm, drop weight mass 1000g, Striker Diameter φ 8mm, Impact depth 2mm.

Impact height 0~50cm, sub-scale 1cm, drop weight mass 1000g, Striker Diameter φ 8mm, Impact depth 2mm, die base aperture φ 15mm, pillow pad edge curvature radius 2.5~ 3.0mm

Impact height 1265mm, drop weight mass 1000g, 2 pounds, punch diameter φ 15.9mm, φ 20mm, Impact depth 10mm, die base aperture φ 27mm, φ 17mm, table size 300 * 240 * 35mm, meet the standard ISO6272M, ASTMD2794 and so on.

Impact height is 0~50cm, drop weight mass 1000g, Striker Diameter is 8 mm, die base aperture is 15 mm, meeting standard GB/T 1732.

The impact speed is 3.8m/s, the strike center distance is 380mm, and the pendulum lift angle is 160 °. It is controlled by single-chip microcomputer to automatically correct the energy loss caused by friction and wind resistance and calculate the impact strength.