$742.00
SE
LANDTEK SRT-6200S Roughness Gauge External Sensors Simultaneous measurement of Ra/Rz/Rq/Rt values
Ra，Rq ：0.05~10.00μm/1.000~400.0uinch；Rz，Rt ：0.020~100.0μm/0.780~4000uinchRa、Rz、Rq、Rt
Inductance type; measurement Ra, Rz, Rq, Rt values, external high-precision Sensors, accuracy ≤ +/- 10%; stylus 10 μm; with RS232 interface, can store 7 sets of data.
$871.00
SE
Defelsko positector SPG1 Roughometer
0~500μm(0~20mils)
Dedicated to sand blasting steel measurement, range 0~500μm; aluminum oxide wear-resistant surface and tungsten carbide stylus tip; built-in temperature compensation function to ensure accuracy; equipment calibration certificate can be traced back to PTB.
$954.00
SE
IPRE SR500 Roughometer OLED Digital Display
Ra:0.025-12.5μm
Using ARM for control and data processing, fast, low power consumption, rich display information, intuitive, can display all parameters and graphics.
$972.00
SE
LEEB432 Surface Roughness Tester multiparameter measurement Measurement range 160μm
160μm
Multiparameter measurement, OLED dot matrix display, mechatronics design, using DSP chip for control and data processing, can store 100 sets of original data sources, compatible with multiple national standards.
$590.00
SE
LANDTEK SRT-6100 Surface Roughometer 10μm stylus measurement Ra and Rz values
Ra、RzRa: 0.05 ~ 10.00μmRz: 0.1 ~ 50.0μm
Inductance type; measurement of Ra and Rz values, accuracy ≤ +/- 15%; built-in Sensors; stylus 10μm; conforms to GB/T6062 standard; with RS232 interface.
Login
High-precision Roughness Gauge KAIRDA NDT150 surface roughness testing instrument
Ra、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrZ axis (vertical): 160μm; X axis (horizontal): 17.5mm
$957.00
SE
LANDTEK SRT-6210 Surface Roughometer Needle Radius 5μm measurement Ra/Rz/Rq/Rt value
Ra、Rz、Rq、RtRa，Rq ：0.05~16.00μm/0.020~629.9uinch；Rz，Rt ：0.020~160.0μm/0.078~6299uinch
Needle tracing method; measurement Ra, Rz, Rq, Rt values, built-in Sensors, accuracy ≤ +/- 10%; large-capacity lithium-ion rechargeable battery; stylus 5μm; with RS232 interface, can store 7 sets of data.
$957.00
SE
LANDTEK SRT-6210S Roughness Gauge 5μm Radius Needle Data storage function
Ra、Rz、Rq、RtRa，Rq ：0.05~16.00μm/0.020~629.9uinch；Rz，Rt ：0.020~160.0μm/0.078~6299uinch
Needle tracing method; measurement of Ra, Rz, Rq, Rt values, external high-precision Sensors, accuracy ≤ +/- 10%; stylus 5μm; with RS232 interface, can store 7 sets of data.
Login
PRSR200 Roughness Gauge supports 16 measurement parameters
Ra、Rq(0.005~16μm)；Rz、Ry、Rt、Rp、Rv、Rmax、R3z、Rz(JIS)(0.02~160μm)；RS、RSm(1mm)；Rmr、Rsk(0~100%)Ra ， Rz ， Rq ， Rt ， Rp ， Rv ， R3z ， R3y ， RzJIS ， Rsk ， Rku ， Rsm ， Rmr
$742.00
SE
LANDTEK SRT-6200 Roughness Gauge 10μm stylus with built-in high-precision Sensors
Ra、RzRa: 0.05 ~ 10.00μm / 1.000 ~ 400.0uinchRz: 0.020 ~ 100.0μm / 0.780 ~ 4000uinch
Inductance; measurement of Ra and Rz values, built-in high-precision Sensors, accuracy ≤ +/- 10%; stylus 10 μm; with RS232 interface.
$972.00
SE
Surface roughness meter AMITTARI AR-132A high-precision Sensors surface roughness meter
Ra，Rq：0.05~10.00μm/1.000~400.0uinch；Rz，Rt：0.020~100.0μm/0.780~4000uinchRa、Rq、Rz、Rt
High cost performance; support Ra. Rz. Rq. Rt multi-parameter measurement, 10 micron measurement radius; high-precision Sensors, LCD digital display, support USB/Bluetooth data connection output.
Login
Surface Finish Meter KAIRDA NDT120 Surface Finish Meter is suitable for a variety of surface finish inspections
Ra: 0.005µm ~ 16.00µmRa、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、Rmr
$778.00
SE
Surface roughness instrument AMITTARI AR-132C Portable precision Surface Roughness Tester
Ra:0.05~10.00μm/1.000~400.0uinch;Rz:0.020~100.0μm/0.780~4000uinchRa、Rz
$901.00
SE
TQC SP1560 Digital display Surface Roughness Tester Coating thickness Measurement Instrument 2-in-1
3.4mm
Equipped with two different probes, Surface Roughness Tester + Coating thickness measurement
Login
LEEB451 Surface Roughness Tester Measurement parameters Ra/Rz/Rq/Rt
Ra、Rz、Rq、RtRa: 0.05 ~ 10.0μmRz: 0.1 ~ 50μm
Login
LEEB452 Roughness Gauge machined parts surface roughness measurement
Ra、RzRa: 0.05 ~ 10.0μmRz: 0.1 ~ 50μm
$720.00
SE
IPRE SR400 Roughometer OLED Digital Display
Ra:0.025-12.5μm
Using ARM for control and data processing, fast, low power consumption, rich display information, intuitive, can display all parameters and graphics.
$770.00
SE
LEEB LBTQ914 surface roughness probe asperity Detector, multiparameter
Z-axis (vertical) 160μm X-axis (horizontal) 17.5mm
Multiparameter, efficient DSP chip for fast data processing and accurate measurement, rich display information and visual graphics output.
$874.00
SE
TQC SP1562 coating Roughness Gauge
0~3,4mm/0~0.13inch
Rapid measurement of pulse height on rough surfaces of varnished film. Measurement range 0-3,4mm/0-0.13inch.
$615.00
SE
LEEB400 Portable Roughness Gauge Measurement parameters Ra, Rz, Rq, Rt
Ra:0.05-10.0μm Rz:0.1-50μmRa、Rz、Rq、Rt
Piezoelectric crystal Sensors, stroke length 6mm, range Ra: 0.05-10 μm, Sensors probe with protective gate, high-speed DSP processor for data processing and calculation.
$692.00
SE
KAIRDA NDT150A Surface Roughness Tester
Z-axis (vertical): 160μm; X-axis (horizontal): 17.5mm (0.69inch)Ra、Rz==Ry(JIS)、Rq、Rt==Rmax、Rp、Rv、R3z、R3y、Rz(JIS)、Rs、Rsk、Rku、Rsm、Rmr、RPc、Rk、Rpk、Rvk、Mr1、Mr2
Measurement range Z axis (vertical): 160μm; X axis (horizontal): 17.5mm (0.69inch), resolution Z axis (vertical) 0.002μm/+/- 20μm; 0.004μm/+/- 40μm; 0.008μm/+/- 80μm, in line with ISO, DIN, ANSI, JIS and other standards.
$692.00
LEEB LBTQ423 surface roughness meter, contour asperity, original contour
Maximum driving stroke 17.5mm/0.7inch, error of indication is not more than +/- 10%, indication variability is not more than 6%, sampling length l0.25mm, 0.8mm, 2.5mm, measurement profile asperity, ripple, original contour.
If you don't know how to choose "Roughometer", please consult customer service.